WP150A9VS/EGW Kingbright

T-1 3/4 (5mm) Single-Level Circuit Board Indicator Part Number: WP150A9VS/EGW High Efficiency Red Green Features Descriptions z Pre-trimmed leads for pc board mounting z The High Efficiency Red source color devices are made z High reliability - life measured in years with Gallium Arsenide Phosphide on Gallium Phosphide z Housing UL rating: 94V-0 Orange Light Emitting Diode. z Housing material: type 66 nylon z The Green source color devices are made with Gallium z RoHS compliant Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF2065 REV NO: V.7A DATE: MAR/16/2017 PAGE: 1 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1102006958 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Emitting Color (Material) Lens Type Min. Typ. 21/2 18 50 High Efficiency Red (GaAsP/GaP) *12 *30 WP150A9VS/EGW White Diffused 40 18 50 Green (GaP) *18 *50 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous Flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Emitting Color Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength nm IF=20mA Super Bright Green 565 High Efficiency Red 617 D 1 Dominant Wavelength nm IF=20mA Super Bright Green 568 High Efficiency Red 45 1/2 Spectral Line Half-width nm IF=20mA Super Bright Green 30 High Efficiency Red 15 C Capacitance pF VF=0V f=1MHz Super Bright Green 15 High Efficiency Red 2 2.5 VF 2 Forward Voltage V IF=20mA Super Bright Green 2.2 2.5 High Efficiency Red 10 IR Reverse Current uA VR = 5V Super Bright Green 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 160 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. 4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. SPEC NO: DSAF2065 REV NO: V.7A DATE: MAR/16/2017 PAGE: 2 OF 6 APPROVED: Wynec CHECKED: Allen Liu DRAWN: L.T.Zhang ERP: 1102006958