WP1533AA/GD14V-W152 Kingbright

4.7mm HOUSING FOR LED LAMP WITH WIRE Part Number: WP1533AA/GD14V-W152 Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Outstanding material efficiency. The Green source color devices are made with Gallium z Reliable and rugged. Phosphide Green Light Emitting Diode. z Low current capability. Static electricity and surge damage the LEDS. z Housing UL rating: 94V-0. It is recommended to use a wrist band or anti-electrostatic z Housing material: type 66 nylon. glove when handling the LEDs. z 14V internal resistor. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Remark: Recommended panel mount hole diameter =6.30-6.35mm panel thickness 1.0mm. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAH0596 REV NO: V.5B DATE: AUG/30/2013 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102009290 Selection Guide Iv (mcd) 2 Viewing V= 14V Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 WP1533AA/GD14V-W152 Green (GaP) Green Diffused 10 25 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Green 565 nm VF=14V D 1 Dominant Wavelength Green 568 nm VF=14V 1/2 Spectral Line Half-width Green 30 nm VF=14V IF Forward Current Green 10.5 13.5 mA VF=14V IR Reverse Current Green 10 uA VR = 5V Note: 1.Wavelength: +/-1nm. 2. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 160 mW Forward Voltage 16 V Reverse Voltage 5 V Operating Temperature -40C To +70C Storage Temperature -40C To +85C Lead Solder Temperature 1 260C For 3 Seconds Lead Solder Temperature 2 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. SPEC NO: DSAH0596 REV NO: V.5B DATE: AUG/30/2013 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1102009290