WP154A4SEJ3VBDZGC/CA Kingbright

WP154A4SEJ3VBDZGC/CA T-1 3/4 (5mm) Full Color LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS z The Hyper Red device is based on light emitting diode chip made from AlGaInP z The Blue source color devices are made with InGaN Light Emitting Diode z The Green source color devices are made with InGaN on Sapphire Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z Uniform light output z Low power consumption z Long life-solid state reliability z RoHS compliant APPLICATIONS z Status indicator z Illuminator z Signage applications Notes: z Decorative and entertainment lighting 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. z Commercial and residential architectural lighting 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. ATTENTION Observe precautions for handling electrostatic discharge sensitive devices SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 1900 2600 Hyper Red (AlGaInP) *1000 *1500 1000 1800 WP154A4SEJ3VBDZGC/CA Water Clear 50 Blue (InGaN) *1000 *1800 1200 2000 Green (InGaN) *1200 *2000 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAO0224 / 1101032014 Rev No: V.3A Date: 11/15/2019 WP154A4SEJ3VBDZGC/CA ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Hyper Red 640 Wavelength at Peak Emission I = 20mA Blue 465 - nm F peak Green 515 Hyper Red 625 1 Dominant Wavelength I = 20mA Blue 470 - nm F dom Green 525 Hyper Red 25 Spectral Bandwidth at 50% REL MAX Blue 22 - nm I = 20mA F Green 30 Hyper Red 27 Capacitance C Blue 100 - pF Green 45 Hyper Red 2.2 2.8 2 Forward Voltage I = 20mA V Blue 3.3 4.0 V F F Green 3.3 4.1 Hyper Red 10 Reverse Current (V = 5V) I Blue - 50 A R R Green 50 Hyper Red 0.13 Temperature Coefficient of peak TC Blue 0.04 - nm/C peak I = 20mA, -10C T 85C F Green 0.05 Hyper Red 0.06 Temperature Coefficient of dom TC Blue 0.03 - nm/C dom I = 20mA, -10C T 85C F Green 0.03 Hyper Red -2 Temperature Coefficient of V F TC Blue -3 - mV/C V I = 20mA, -10C T 85C F Green -3 Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Hyper Red Blue Green Power Dissipation P 84 120 102.5 mW D Reverse Voltage V 5 5 5 V R Junction Temperature T 115 115 115 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 30 30 25 mA F 1 Peak Forward Current I 150 100 150 mA FM Electrostatic Discharge Threshold (HBM) 3000 250 450 V - 2 Thermal Resistance (Junction / Ambient) R 170 230 310 C/W th JA 2 Thermal Resistance (Junction / Solder point) R 120 170 270 C/W th JS 3 Lead Solder Temperature 260C For 3 Seconds 4 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2 2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm per pad). 3. 2mm below package base. 4. 5mm below package base. 5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAO0224 / 1101032014 Rev No: V.3A Date: 11/15/2019