WP56BID Kingbright

WP56BID T-1 3/4 (5mm) Blinking LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS z The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode z Electrostatic discharge and power surge could damage the LEDs z It is recommended to use a wrist band or anti- Electrostatic glove when handling the LEDs z All devices, equipments and machineries must be electrically grounded FEATURES z T-1 3/4 package z With built-in blinking IC z Operation voltage from 3.5V to 14V z Blinking frequency from 3.0Hz to 1.5Hz z RoHS compliant APPLICATIONS z Status indicator z Signage applications z Decorative and entertainment lighting ATTENTION Notes: Observe precautions for handling 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. electrostatic discharge sensitive devices 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SELECTION GUIDE 1 Iv (mcd) V = 9V Viewing A ngle Emitting Color Part Number Lens Type (Material) Min. Typ. 2 1/2 18 40 High Efficiency Red WP56BID Red Diffused 60 (GaAsP/GaP) *12 *25 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. * Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAE9871 / 1101009279 Rev No: V.10A Date: 11/21/2019 WP56BID ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Min. Typ. Max. Peak Wavelength High Efficiency Red - 627 - nm peak 1 Dominant Wavelength High Efficiency Red - 617 - nm dom Spectral Bandwidth at 50% REL MAX High Efficiency Red - 45 - nm Forward Current Min: V = 3.5V Typ: V = 5V I High Efficiency Red 8 22 - mA F F F Supply Current V = 3.5V ISON High Efficiency Red - 8 - mA F Supply Current V = 14V ISON High Efficiency Red - 44 - mA F Blink Frequency V = 3.5V~14V f High Efficiency Red 1.5 - 3 Hz F Notes: 1. The dominant wavelength ( d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 310 mW D Reverse Voltage V 0.5 V R Junction Temperature T 125 C j Operating Temperature T -40 to +70 C op Storage Temperature T -40 to +85 C stg Forward Voltage V 14 V F Electrostatic Discharge Threshold (HBM) 1000 V - 1 Lead Solder Temperature 260C For 3 Seconds 2 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 2mm below package base. 2. 5mm below package base. 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAE9871 / 1101009279 Rev No: V.10A Date: 11/21/2019