WP710A10NT Kingbright

T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10NT Pure Orange Features Description z Low power consumption. The Pure Orange source color devices are made with Gal- z Popular T-1 diameter package. lium Arsenide Phosphide on Gallium Phosphide Pure Or- z General purpose leads. ange Light Emitting Diode. z Reliable and rugged. z Long life - solid state reliability. z Available on tape and reel. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070 Selection Guide Iv (mcd) 2 Viewing 10mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 15 40 WP710A10NT Pure Orange (GaAsP/GaP) Orange Transparent 34 *12 *30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Pure Orange 607 nm IF=20mA D 1 Dominant Wavelength Pure Orange 602 nm IF=20mA 1/2 Spectral Line Half-width Pure Orange 35 nm IF=20mA C Capacitance Pure Orange 15 pF VF=0V f=1MHz VF 2 Forward Voltage Pure Orange 2.05 2.5 V IF=20mA IR Reverse Current Pure Orange 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Pure Orange Units Power dissipation 62.5 mW DC Forward Current 25 mA Peak Forward Current 1 145 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAL0516 REV NO: V.3A DATE: FEB/17/2013 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101029070