WP710A10ZGC Kingbright

T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10ZGC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Low power consumption. The Green source color devices are made with InGaN z Popular T-1 diameter package. on Sapphire Light Emitting Diode. z General purpose leads. Static electricity and surge damage the LEDS. z Reliable and rugged. It is recommended to use a wrist band or anti-electrostatic z Long life - solid state reliability. glove when handling the LEDs. z Available on tape and reel. All devices, equipment and machinery must be electrically z RoHS compliant. grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL0568 REV NO: V.2 DATE: MAR/07/2011 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101029055 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 WP710A10ZGC Green (InGaN) WATER CLEAR 6000 9000 34 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Green 515 nm IF=20mA D 1 Dominant Wavelength Green 525 nm IF=20mA 1/2 Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V f=1MHz VF 2 Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 50 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current 1 150 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAL0568 REV NO: V.2 DATE: MAR/07/2011 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: J.Yu ERP: 1101029055