WP710A10ZGC/E Kingbright

T-1 (3mm) SOLID STATE LAMP Part Number: WP710A10ZGC/E Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Descriptions Low power consumption. The Green source color devices are made with InGaN Popular T-1 diameter package. Light Emitting Diode. General purpose leads. Electrostatic discharge and power surge could damage Reliable and rugged. the LEDs. Long life - solid state reliability. It is recommended to use a wrist band or anti- Available on tape and reel. electrostatic glove when handling the LEDs. RoHS compliant. All devices, equipments and machineries must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAL0569 REV NO: V.2B DATE: APR/04/2014 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029124 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 WP710A10ZGC/E Green (InGaN) Water Clear 7000 12000 34 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions peak Peak Wavelength Green 520 nm IF=20mA D 1 Dominant Wavelength Green 525 nm IF=20mA 1/2 Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V f=1MHz VF 2 Forward Voltage Green 3.2 4 V IF=20mA IR Reverse Current Green 50 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3. Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current 1 100 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAL0569 REV NO: V.2B DATE: APR/04/2014 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: F.Cui ERP: 1101029124