WP7113SF4BT Kingbright

T-1 3/4 (5mm) INFRARED EMITTING DIODE Part Number: WP7113SF4BT Features Description z MECHANICALLY AND SPECTRALLY MATCHED TO SF4 Made with Gallium Aluminum Arsenide Infrared Emit- THE PHOTOTRANSISTOR. ting diodes. z WATER CLEAR LENS. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the lead emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF6060 REV NO: V.2 DATE: DEC/21/2007 PAGE: 1 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1101005218 Selection Guide Po (mW/sr) 2 Viewing 20mA *50mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 4 20 WP7113SF4BT SF4 (GaAIAs) BLUE TRANSPARENT 20 *7 *30 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 50mA Radiant Intensity/ luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25C Parameter P/N Symbol Typ. Max. Units Test Conditions Forward Voltage 1 SF4 VF 1.3 1.6 V IF=20mA Reverse Current SF4 IR 10 uA VR = 5V Capacitance SF4 C 90 pF VF=0V f=1MHz Peak Spectral Wavelength SF4 P 880 nm IF=20mA Spectral Bandwidth SF4 1/2 50 nm IF=20mA Note: 1. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter Symbol SF4 Units Power dissipation PT 80 mW DC Forward Current IF 50 mA Peak Forward Current 1 iFS 1.2 A Reverse Voltage VR 5 V Operating Temperature TA -40 To +85 C Storage Temperature TSTG -40 To +85 C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/100 Duty Cycle, 10s Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF6060 REV NO: V.2 DATE: DEC/21/2007 PAGE: 2 OF 4 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Ting.Li ERP: 1101005218