WP7113SF7C Kingbright

WP7113SF7C T-1 3/4 (5mm) Infrared Emitting Diode DESCRIPTION PACKAGE DIMENSIONS z SF7 Made with Gallium Aluminum Arsenide Infrared Emitting diodes FEATURES z Mechanically and spectrally matched to the phototransistor z RoHS compliant APPLICATIONS z Infrared Illumination for cameras z Machine vision systems z Surveillance systems z Industrial electronics z IR data transmission z Remote control Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SELECTION GUIDE 2 2 1 Po (mW/sr) 20mA Po (mW/sr) 5 0mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. Min. Typ. 2 1/2 WP7113SF7C Infrared (GaAlAs) Water Clear 12 30 40 90 20 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant Intensity / luminous flux: +/-15%. 3. Radiant intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAF2425 / 1101006708 Rev No: V.5B Date: 04/12/2019 WP7113SF7C ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Wavelength at Peak Emission I = 20mA Infrared 850 - nm F peak Spectral Bandwidth at 50% REL MAX Infrared 50 - nm I = 20mA F Capacitance C Infrared 30 - pF 1 Forward Voltage I = 20mA V Infrared 1.4 1.6 V F F Reverse Current (V = 5V) I Infrared - 10 A R R Notes: 1. Forward voltage: 0.1V. 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Parameter Symbol Value Unit Power Dissipation P 95 mW D Reverse Voltage V 5 V R Junction Temperature T 120 C j Operating Temperature T -40 to +85 C op Storage Temperature T -40 to +85 C stg DC Forward Current I 50 mA F 1 Peak Forward Current I 1 A FM Electrostatic Discharge Threshold (HBM) 8000 V - 2 Lead Solder Temperature 260C For 3 Seconds 3 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 1/100 Duty Cycle, 10s Pulse Width. 2. 2mm below package base. 3. 5mm below package base. 4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2019 Kingbright. All Rights Reserved. Spec No: DSAF2425 / 1101006708 Rev No: V.5B Date: 04/12/2019