WP93WEGC Kingbright

T-1(3mm) BI-COLOR INDICATOR LAMP PRELIMINARY SPEC Part Number: WP93WEGC HIGH EFFICIENCY RED GREEN Description Features The High Efficiency Red source color devices are made UNIFORM LIGHT OUTPUT. With Gallium Arsenide Phosphide on Gallium Phosphide LOW POWER CONSUMPTION. Orange Light Emitting Diode. 3 LEADS WITH ONE COMMON LEAD. I.C. COMPATIBLE. The Green source color devices are made with Gallium LONG LIFE - SOLID STATE RELIABILITY. Phosphide Green Light Emitting Diode. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG0541 REV NO: V.2 DATE: JUL/06/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1101008770Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Dice Lens Type Part No. Min. Typ. 2 1/2 HIGH EFFICIENCY RED (GaAsP/GaP) 36 80 WP93WEGC WATER CLEAR 50 GREEN (GaP) 18 50 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 Peak Wavelength nm I =20mA peak F Green 565 High Efficiency Red 625 D 1 Dominant Wavelength nm I =20mA F Green 568 High Efficiency Red 45 1/2 Spectral Line Half-width nm I =20mA F Green 30 High Efficiency Red 15 C Capacitance pF V =0V f=1MHz F Green 15 High Efficiency Red 2.0 2.5 VF 2 Forward Voltage V I =20mA F Green 2.2 2.5 High Efficiency Red 10 IR Reverse Current uA VR = 5V Green 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 160 140 mA Reverse Voltage 5 V Operating/storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG0541 REV NO: V.2 DATE: JUL/06/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1101008770