WP93WEGW Kingbright

T-1(3mm) BI-COLOR INDICATOR LAMP Part Number: WP93WEGW High Efficiency Red Green Features Description z Uniform light output. The High Efficiency Red source color devices are made with z Low power consumption. Gallium Arsenide Phosphide on Gallium Phosphide Orange z 3 leads with one common lead. Light Emitting Diode. z Long life - solid state reliability. The Green source color devices are made with Gallium z RoHS compliant. Phosphide Green Light Emitting Diode. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF6030 REV NO: V.4A DATE: AUG/31/2013 PAGE: 1 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101008771 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 2 1/2 20 50 High Efficiency Red (GaAsP/GaP) *12 *30 WP93WEGW White Diffused 60 20 40 Green (GaP) *20 *40 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength nm IF=20mA Green 565 High Efficiency Red 617 D 1 Dominant Wavelength nm IF=20mA Green 568 High Efficiency Red 45 1/2 Spectral Line Half-width nm IF=20mA Green 30 High Efficiency Red 15 C Capacitance pF VF=0V f=1MHz Green 15 High Efficiency Red 2 2.5 VF 2 Forward Voltage V IF=20mA Green 2.2 2.5 High Efficiency Red 10 IR Reverse Current uA VR = 5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. 3.Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Green Units Power dissipation 75 62.5 mW DC Forward Current 30 25 mA Peak Forward Current 1 160 140 mA Reverse Voltage 5 V Operating / Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF6030 REV NO: V.4A DATE: AUG/31/2013 PAGE: 2 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.Liu ERP: 1101008771