WPF5WAEMBGMBW Kingbright

T-1 3/4 (5mm) LED LAMP Part Number: WPF5WAEMBGMBW ATTENTION High Efficiency Red OBSERVE PRECAUTIONS Blue FOR HANDLING Green ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z One red, one green, two blue chips in one package. The High Efficiency Red source color devices are made with z Can produce any color in visible spectrum, including Gallium Arsenide Phosphide on Gallium Phosphide Orange white light. Light Emitting Diode. z RoHS compliant. The Blue source color devices are made with GaN on SiC Light Emitting Diode. The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAF5130 REV NO: V.3 DATE: JUL/14/2010 PAGE: 1 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101009115-01 Selection Guide Iv (mcd) 2 Viewing 20mA Angle 1 Part No. Dice Lens Type Min. Typ. 21/2 High Efficiency Red (GaAsP/GaP) 10 30 Blue (GaN) 7 25 WPF5WAEMBGMBW WHITE DIFFUSED 60 Green (GaP) 7 20 Blue (GaN) 7 25 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. Max. Units Test Conditions High Efficiency Red 627 peak Peak Wavelength Blue 430 nm IF=20mA Green 565 High Efficiency Red 625 D 1 Dominant Wavelength Blue 466 nm IF=20mA Green 568 High Efficiency Red 45 1/2 Spectral Line Half-width Blue 60 nm IF=20mA Green 30 High Efficiency Red 15 C Capacitance Blue 100 pF VF=0V f=1MHz Green 15 High Efficiency Red 2 2.5 VF 2 Forward Voltage Blue 3.8 4.5 V IF=20mA Green 2.2 2.5 High Efficiency Red 10 IR Reverse Current Blue 10 uA VR=5V Green 10 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Blue Green Units Power dissipation 75 135 62.5 mW DC Forward Current 30 30 25 mA Peak Forward Current 1 160 150 140 mA Reverse Voltage 5 V Operating/Storage Temperature -40C To +85C Lead Solder Temperature 2 260C For 3 Seconds Lead Solder Temperature 3 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF5130 REV NO: V.3 DATE: JUL/14/2010 PAGE: 2 OF 8 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1101009115-01