B056RC4S Knowles

5.6 GHz Surface Mount Bandpass Filter www.knowlescapacitors.com B056RC4S SPECIFICATIONS* DESCRIPTION Frequency Parameter Min Typ. Max One of DLIs surface mountable catalog Range (GHz) bandpass filters. This filter utilizes DLIs low loss temperature stable materials which offer small size and minimal performance variation over Insertion Loss (dB) 2.5 temperature. The catalog BPFs are offered in a 4.0 - 8.0 variety of frequency bands, which offers a drop Return Loss (dB) 14 17 in solution with highly repeatable performance. Low Side Rejection (dB) DC - 3.0 40 50 FEATURES High Side Rejection (dB) 9.5 - 12 40 43 Small Size Fully Shielded Component CW Input Power (W)** 4.0 - 8.0 15 Solder Surface Mount Package - 5 Moisture Sensitivity Level: MSL1 Frequency Stable over Temperature 0.450 x 0.230 x 0.103 in Size (L x W x H) Operating & Storage Temp: -55C to +125C 11.43 x 5.84 x 2.62 mm Characteristic Impedance: 50 *Electrical specifications based on typical probed performance at room temperature. Insertion loss shall vary 0.5dB over temperature. **Power rating assumes the component will be mounted to a PCB with good thermally conducting ground vias as outlined in the recommended PCB layout that are connected to an adequate heat sink. Max power is based on 125C base temperature. Typical Measured Performance 2777 Route 20 East, Cazenovia, NY 13035 Ph.: (315)655-8710 KCCSales knowles.com Aug 2021 5.6 GHz Surface Mount Bandpass Filter www.knowlescapacitors.com B056RC4S Physical Dimensions Units = inches Recommended PCB Layout 50 trace dimensions are application specific. Ensure adequate grounding beneath the part. 2777 Route 20 East, Cazenovia, NY 13035 Ph.: (315)655-8710 KCCSales knowles.com Aug 2021