resistors
,
Z J
zero ohm jumpers
EU
features
Type Z are conformal coated
Type J are molded
Suitable for automatic machine insertion
Size compatible with 1/8, 1/4 and 1/2 watt resistors
Marking: Type Z are tan color, single black band identifier
Type J are black, no marking
Products with lead-free terminations meet EU RoHS
and China RoHS requirements
dimensions and construction
Type Z D L l Dimensions inches (mm)
1
l
1
Type L (ref.) C (max.) D d (nom.)
Standard Long
d
+.008
.067
.126.008 .134 -.004 .018
Z16
2 3
+0.2
(3.20.2) (3.4) (0.45)
(1.7 )
.551 Min. .787 Min.
-0.1
(14.0 Min.) (20.0 Min.)
.240.02 .091.012
Z25
Insulation Marking Resistive End Lead (6.10.5) (2.30.3)
.280 .024
Coating Film Cap Wire
(7.1) (0.6)
.228 .087.004
C
Z25Y
(5.8) (2.20.1)
+.004
Type J D L l
.134
-.008
.067.008 .020
J1/6Z 1.18.118
+0.1
(1.70.2) (0.5)
(3.4 )
(30.03.0)
-0.2
d
+0
.091
-.012
.256.02 .024
J1/4Z
+0
(6.50.5) (0.6)
(2.3 )
-0.3
1
Lead length changes depending on taping and forming type.
2
Molded Resin Solder Plated Forming code S is applied for bulk type.
3
Copper Wire
Long type is custom-made.
ordering information
New Part # Z16 C T52 A
Type Termination Material Taping and Forming Packaging
Z16 C: SnCu T26, T52 A: Ammo
Z25 R: Reel
Z25Y
J1/4Z
J1/6Z
For further information on packaging,
please refer to Appendix C.
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 12/18/12
164 KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com,
Z J
zero ohm jumpers
applications and ratings
Minimum
Rated Operating
Part Maximum Dielectric
Resistance Ambient Temperature
Designation Amperage Withstanding
Temperature Range
Voltage
Z16
1.5A 300V
Z25 2.5A 500V 20m or less
+70C -55C to +155C
Z25Y
15A 500V
Rated Operating
Part Maximum
Ambient Temperature
Designation Allowable Current
Temperature Range
J1/6ZC 8A
+70C -55C to +125C
J1/4ZC
10A
environmental applications
Derating Curve
15
Z25Y
12
J1/4Z
9
J1/6Z
6
Z25
3
Z16
0
-80 -40 0 40 801120 60
-55 70 125 155
Ambient Temperature
(C)
For resistors operated at an ambient temperature of 70C or above, a
power rating shall be derated in accordance with the above derating curve.
Performance Characteristics
Parameter Requirement Test Method JIS C5201-1
Resistance Measuring points are 10mm 1mm from the end cap
Less than 20m
Terminal except 3mm shall be immersed in the solder, 350C 5C,
Resistance to Solder Heat
3.5 seconds 0.5 second
Solderability 90% coverage minimum 235C 5C, 2 seconds 0.5 second
(Direct Load) Z16: 5N, 30 seconds, Z25: 10N, 30 seconds
Terminal Strength No mechanical damages (Twist Test) 360, 5 times
(Bending Test) 5N, 90, 2 times (Z16: 2.5N)
Rapid Change of Temperature -55C (30 minutes)/+85C (30 minutes), 5 cycles
Moisture Resistance Less than 20m 40C 2C, 90-95% RH, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
Endurance @ 70C 70C 2C, 1000 hours, 1.5 hr ON, 0.5 hr OFF cycle
No visible damages to protective Isopropyl alcohol with ultrasonic cleansing for 2 minutes
Solvent Resistance
2
coating and marking Power: 0.3W/cm , f: 28kHz, Temperature: 35C 5C
Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before you order and/or use. 11/29/16
KOA Speer Electronics, Inc. 199 Bolivar Drive Bradford, PA 16701 USA 814-362-5536 Fax: 814-362-8883 www.koaspeer.com 165
Amps
resistors