FLEXIBLE NON-METALLIC CONDUIT MEDIUM DUTY Technical Data Sheet CONSTRUCTION: NYLON 6, HALOGEN FREE RECOMMENDED CONNECTORS: FINE PITCH YQ, YS or YX COARSE PITCH YV or YW CONDUIT SIZE (mm) 10 12 16 20 25 32 ORDERING CODES EP* 0110 EP* 0210 EP* 0310 EP* 0410 EP* 0510 EP* 0610 EP* 0130 EP* 0230 EP* 0330 EP* 0430 EP* 0530 EP* 0630 (* B FOR BLACK OR G FOR GREY) EP* 0150 EP* 0250 EP* 0350 EP* 0450 EP* 0550 EP* 0650 DIMENSIONS: CONDUIT PITCH FINE (T) FINE (T) FINE (T) FINE (T) FINE (T) FINE (T) INSIDE DIAMETER (mm) 6.5 9.6 11.5 16.1 22.3 28.4 OUTSIDE DIAMETER (mm) 10.0 13.0 15.8 21.2 28.5 34.7 MINIMUM BEND RADIUS (mm) 15.0 30.0 32.0 40.0 56.0 64.0 AVERAGE WEIGHT (kg/100m) 1.9 3.6 4.5 7.4 13.6 16.5 MECHANICAL CLASSIFICATIONS: CONNECTOR PULL-OFF V.LIGHT V.LIGHT V.LIGHT LIGHT LIGHT LIGHT CONDUIT CRUSH V.LIGHT V.LIGHT V.LIGHT LIGHT LIGHT LIGHT CONDUIT SIZE (mm) 40 50 70 95 ORDERING CODES EP* 0710 EP* 0810 EPG 1001 EPG 1201 EP* 0730 EP* 0830 EPG 1010 EPG 1210 (* B FOR BLACK OR G FOR GREY) EP* 0750 EP* 0850 DIMENSIONS: CONDUIT PITCH COARSE (G) COARSE (G) COARSE (G) COARSE (G) INSIDE DIAMETER (mm) 34.6 46.0 67.0 90.0 OUTSIDE DIAMETER (mm) 42.5 54.5 80.0 106.0 MINIMUM BEND RADIUS (mm) 90.0 95.0 160.0 210.0 AVERAGE WEIGHT (kg/100m) 24.0 29.5 48.0 85.0 MECHANICAL CLASSIFICATIONS: CONNECTOR PULL-OFF HEAVY MEDIUM CONDUIT CRUSH LIGHT LIGHT FOR TEST METHODS AND EXPLANATION OF CLASSIFICATIONS SEE SHEET 810100. FOR PERFORMANCE DETAILS OF NYLON MATERIAL SEE SHEET 810086 OTHER PROPERTIES: FLAME DIES IN LESS THAN 30 SECONDS AFTER IGNITION SOURCE REMOVED. RESISTANCE TO FLAME PROPAGATION RATED UL 94 V AND UL 224. 0 IP 66 (NO INGRESS OF TALCUM POWDER UNDER VACUUM AND NO INGRESS OF IP RATING WITH RECOMMENDED CONNECTOR WATER WITH NOZZLE SPRAY FROM 3m). STATIC - 40 TO + 120 C. OPERATING TEMPERATURE FLEXING -5 TO + 120 C. UR COMPONENT RECOGNISED, RATED AT 105 C. (NOT 70 AND 95mm SIZES). APPROVALS KOPEX FLEXIBLE NON-METALLIC CONDUIT IS INTENDED TO PROTECT CABLES IN APPLICATIONS WHERE THERE IS REPEATED FLEXING, VIBRATION AND BENDING. WHEN INSTALLING WIRING SYSTEMS, ADHERENCE TO THE CURRENT WIRING REGULATIONS BS7671 OR NEC WIRING REGULATIONS (FOR USA) IS STRONGLY ADVISED. The Companys policy is one of continuous improvement and reserves the right to change specifications at any time without prior notice. KOPEX INTERNATIONAL LIMITED, Crossbow House, 40 Liverpool Road, Slough, Berkshire, SL1 4QZ, England. 810033/13 Telephone: + 44 (0) 1753 502502. Fax: + 44 (0) 1753 693521. Website: www.kopex.co.uk X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Wire Identification category: Click to view products by Kopex manufacturer: Other Similar products are found below : CU6337-000 CU6342-000 FCA-410-12 11631010 1-1768037-1 1-1768037-2 1-1768050-0 PXLK-VI Q62184-1 A64304-000 QMT221 HK032WE1NF038B 1330-0519-10 1395199-1 1395200-1 1395202-1 DMVF050WE-300S6 D-SCE-1K-2.4-50-4-CS7834 1538738-1 E90935-000 EC1238-000 EC1465-000 EC1855-000 EC1859-000 EC1863-000 EC5415-000 EC7277-000 EC7352-000 EC7603-000 EC7707-000 EC7735-000 EC7768-000 EC7828-000 EC7854-000 EC7952-000 EC8128-000 1768037-8 1768041-7 NC-127191-10-9 HS048WE2NF038B C03232-000 HTCM-SCE-14-4H-9 HTMS-3/16-9 HT-SCE-1/4-2.0-4 HT-SCE-3/16-2.0-4 HTTMS-1/2-1.50-9 HTTMS- CM-1/2-4H-9 HX-SCE-19.0-50-9 HX-SCE-6.4-50-4 C25254-000