008289014006113 Kyocera AVX

Ejector Style Header Series 8289 Available in industry standard sizes of 10-64 positions, they mate to Elco Series 8290 IDC sockets, as well as other industry compatible connectors. Solder or press-fit contacts are available in either straight or right angle formats. The four wall design and optional molded in polarizing keys ensure positive polarization without pin loss. Latch/eject levers can also be specified to suit the mating Series 8290 socket, either with or without strain relief. Stand-off are incorporated to facilitate flux washing and de-gassing. TECHNICAL SPECIFICATION Material: Current Rating: Insulation Resistance: Molding - UL94VO rated glass filled grey 1 ampere at 70C maximum ambient >1000 megohms polyester Voltage Rating: Operating Temperature: Contact - Phosphor bronze 350V DC or AC peak -55C to +125C Contact Plating: Contact Resistance: UL File No. E90723 Selective gold over nickel plating on the Initially 10 milliohms maximum CSA File No. 1255749 mating face, reflow tin lead IDC section Dielectric Withstanding Voltage: 1050 DC or AC peak Latch/Eject Levers Part Numbers when ordered separately. Long (For 8290 socket with strain relief) 60 8289 6301 00 000 Short (For 8290 socket without strain relief) 60 8289 6302 00 000 ORDERING CODE 00 8289 050 002 1 1 1 Connector Code Series Number of Latch/Eject Lever Polarization Prefix Number Contacts 1 = Type A BS9525 0 = No 00 = Standard 010 = 10 position & BT224 Dual Latch/Eject 014 = 14 position Height molding Lever 016 = 16 position in polarizing 1 = Latch/Eject 020 = 20 position key/keys Lever for use Contact 026 = 26 position 3 = No Polarizing Termination with Series 034 = 34 position key/keys - 8290 with 002 = Straight PC Tail 040 = 40 position Standard strain relief Plating for 2.4mm PCB - 050 = 50 position 2 = Latch/Eject 1 = Selective Plating 0.142 (3.60mm) 060 = 60 position Lever for use 30 Gold over 004 = Right Angle PC 064 = 64 position with Series Nickel Tail for 2.4mm 8290 with- 4 = Selective Plating PCB - 0.142 out strain 10 Gold over (3.60mm) relief Nickel 006 = Straight PC Tail for 1.6mm PCB - 0.110 (2.80mm) 007 = Right Angle PCB Tail for 1.6mm PCB - 0.110 (2.80mm) 009 = Press-Fit PC Tail 2.4/3.2mm PCB - 0.209 (5.3mm) 12 ELCOELCOELCOELCOEjector Style Header Series 8289 DIMENSIONS: millimeters (inches) No. of Ways AB C D 10 10.16 (.040) 21.84 (.860) 27.94 (1.10) 32.11 (1.26) 14 15.24 (.060) 26.92 (1.06) 33.02 (1.30) 37.19 (1.46) 16 17.78 (.070) 29.46 (1.16) 35.56 (1.40) 39.73 (1.56) 20 22.86 (.090) 34.54 (1.36) 40.64 (1.60) 44.81 (1.76) 26 30.48 (1.20) 42.16 (1.66) 40.64 (1.90) 52.43 (2.06) 34 40.64 (1.60) 52.32 (2.06) 58.42 (2.30) 62.59 (2.46) 40 48.26 (1.90) 59.94 (2.36) 66.04 (2.60) 70.21 (2.76) 50 60.96 (2.40) 72.64 (2.86) 78.74 (3.10) 82.91 (3.26) 60 73.66 (2.90) 85.34 (3.36) 91.44 (3.60) 95.61 (3.76) 64 78.74 (3.10) 90.42 (3.56) 96.52 (3.80) 100.69 (3.96) 13 ELCOELCO