069176702001000 Kyocera AVX

Single IDC Contact 18-24 AWG: WTB INTERINTER CONNECTCONNECT 9176-500 The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB ranging from 14 AWG to 28 AWG. This industry proven contact system has been tested to automotive levels of shock, vibration, and temperature cycling to prove their reliability and robustness. This new single contact was developed as a standalone component to enhance the application uses with the IDC technology. The simplicity of inserting a wire into an SMT contact with a small tool or optional retention / termination cap allows a wide range of devices to be connected to the PCB without soldering. In SSL applications specifically, these contacts are used to bring power and signal onto the PCB or are used to daisy chain multiple boards together in a long string. While the IDC contact provides a gas-tight connection to conductor of the wire, the optional cap provides a positive strain relief even in the harshest conditions. In case of repair, the wires can be removed and replace up to three times. The single 9176 series contact and cap accepts 18 AWG to 24 AWG wires with an insulation diameter ranging from 1.1mm to 2.1mm. These dual beam contacts support a 10 amp current rating with a large SMT solder base to provide maximum stability on the PCB. The optional locking strain relief cap acts as the termination tool for severe vibration applications. APPLICATIONS FEATURES AND BENEFITS Connecting discrete wire components IDC contact is supplied in T&R pockets for standard SMT placement directly to the PCB IDC contact provides a gas-tight connection to the PCB for long term reliability Bringing power and signals onto a PCB Optional termination cap provides additional strain relief for severe environments Daisy chaining PCBs together to create Tested to automotive levels on shock, vibration and temperature cycling for reliability a continuous string of boards Reduced total applied cost versus solder or crimp processes Application notes: refer to 201-01-124 Individual contacts can be located anywhere on the PCB based on specific application ELECTRICAL ENVIRONMENTAL MECHANICAL Current Rating: 10 Amps/Contact Operating Temperature: Insulator Material: Nylon 46: UL94V0 Voltage Rating: Dependant on -40C to +125C Contact Material: Phosphor Bronze component proximity Plating: Tin over Nickel Durability: 3 Cycles HOW TO ORDER CONTACT OPTIONS 001 5XX 006 70 9176 Number of Ways Wire Gauge Size Plating Prefix Series Option 70 = Contact No of Code Accepted Code 006 = Pure Tin Details Ways Wire Gauge all over 001 1 Page 3 501 18 Gauge Stranded 511 20 Gauge Solid or Stranded 522 22 Gauge Solid or Stranded 532 24 Gauge Solid or Stranded HOW TO ORDER CAP OPTIONS 001 5XX X00 60 9176 Number of Ways Wire Gauge Size Insulator Color Prefix Series 60 = Cap No of Code Wire Insulation Code Color Application Code Details Ways (AWG) 000 Black Industrial 001 1 Page 5 516 1.1-1.6 (22-24) 100 White Lighting 521 1.6-2.1 (18-20) CONNECTOR/TOOLING PART NUMBER MATRIX SERIES 9176-500 IDC HAND INSERTION TOOLING* ACCESSORY CAPS Wire Plastic Metal Cap Application AWG Positions Part Number White Black Insulation (medium volume) (high volume) Tool 18 1.6 - 2.1 1p 709176001501006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000 20 1.6 - 2.1 1p 709176001511006 069176702001000 069176701901000 069176701801000 609176001521100 609176001521000 22 1.1 - 1.6 1p 709176001522006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000 24 1.1 - 1.6 1p 709176001532006 069176702002000 069176701902000 069176701801000 609176001516100 609176001516000 * Hand Insertion Tooling and Cap Application - Universal Hand Tool 067000773001000 Consult Application Notes 201-01-124 Certification: UL File E90723Certification: UL File E90723 1Single IDC Contact 18-24 AWG: WTB INTERINTER CONNECTCONNECT 9176-500 CONTACT DETAILS Code Accepted A Wire Gauge 501 18 AWG Stranded 0.72 511 20 AWG Solid and Stranded 0.60 522 22 AWG Solid and Stranded 0.47 532 24 AWG Solid and Stranded 0.37 NOTES: 1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION. 2. CONTACT MATERIAL: PHOSPHOR BRONZE. 3. CONTACT PLATING: PURE TIN. 4. CONNECTOR DESIGNED TO ACCEPT BETWEEN 18 AND 24 GAUGE STRANDED WIRE. SEE TABLE. 5. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED. 6. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION NOTES 201-01-124. 7. SMT PCB LAYOUT, REFER TO PAGE 3. 8. PACKING IN TAPE AND REEL, QUANTITY 1000 PER REEL. 9. WHEN REQUIRED, MATCHING CAP DETAILS ON DRAWING 60-9176-001-5XX-X00S. 10. ASSEMBLY TOOLING ON PAGE 5 (WITH CAP AND WITHOUT CAP). PACKING DETAILS REEL QTY 1000 LEADER 480MM TRAILER 120MM 2