ATC 100 B Series
Porcelain Superchip
Multilayer Capacitors
Case B Size Capacitance Range
(.110" x .110") 0.1 pF to 1000 pF
High Q Ultra-Stable Performance
Low ESR/ESL High Self-Resonance
Low Noise Established Reliability (QPL)
ELECTRICAL AND MECHANICAL
Extended WVDC up to 1500 VDC
SPECIFICATIONS
QUALITY FACTOR (Q): greater than 10,000 at 1 MHz.
ATC, the industry leader, offers new improved ESR/ESL performance
TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC):
for the 100 B Series RF/Microwave Capacitors. This Series is now
+90 20 PPM/C (-55C to +125C)
available with extended operating temperatures up to 175C. High
+90 30 PPM/C (+125C to +175C)
Density porcelain construction provides a rugged, hermetic package.
INSULATION RESISTANCE (IR):
Typical functional applications: Bypass, Coupling, Tuning, Feedback,
0.1 pF to 470 pF:
6
Impedance Matching and DC Blocking.
10 Megohms min. @ +25C at rated WVDC.
5
10 Megohms min. @ +125C at rated WVDC.
Typical circuit applications: UHF/Microwave RF Power Amplifiers,
510 pF to 1000 pF:
Mixers, Oscillators, Low Noise Amplifiers, Filter Networks, Timing
5
10 Megohms min. @ +25C at rated WVDC.
Circuits and Delay Lines. 4
10 Megohms min. @ +125C at rated WVDC.
IR above +125C is derated by one order of magnitude.
ENVIRONMENTAL TESTS
WORKING VOLTAGE (WVDC): See Capacitance Values Table, page 2.
ATC 100 B Series Capacitors are designed and manufactured to
DIELECTRIC WITHSTANDING VOLTAGE (DWV):
meet and exceed the requirements of EIA-198, MIL-PRF-55681
250% of WVDC for capacitors rated at 500 volts DC or less for 5 seconds.
and MIL-PRF-123.
150% of WVDC for capacitors rated at 1250 volts DC or less for 5 seconds.
THERMAL SHOCK: MIL-STD-202, Method 107, Condition A.
120% of WVDC for capacitors rated above 1250 volts DC for 5 seconds.
MOISTURE RESISTANCE: MIL-STD-202, Method 106.
RETRACE: Less than (0.02% or 0.02 pF), whichever is greater.
LOW VOLTAGE HUMIDITY: AGING EFFECTS: None
MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied
PIEZOELECTRIC EFFECTS: None
while subjected to an environment of 85C with 85% relative hu-
(No capacitance variation with voltage or pressure).
midity for
CAPACITANCE DRIFT: (0.02% or 0.02 pF), whichever is greater.
240 hours min.
OPERATING TEMPERATURE RANGE:
LIFE TEST:
0.1 to 330 pF: from -55C to +175C
MIL-STD-202, Method 108, for 2000 hours, at 125C.
360 to 1000 pF: from -55C to +125C
Voltage Applied:
200% of WVDC for capacitors rated at 500 volts DC or less. TERMINATION STYLES:
Available in various surface mount and leaded styles.
120% of WVDC for capacitors rated at 1250 volts DC or less.
See Mechanical Configurations, page 3.
100% of WVDC for capacitors rated above 1250 volts DC.
TERMINAL STRENGTH: Terminations for chips and pellets with-
stand a pull of 5 lbs. min., 15 lbs. typical, for 5 seconds in direction
perpendicular to the termination surface of the capacitor. Test per MIL-
STD-202, method 211.
ATC # 001-807 Rev. Q; 9/14ATC 100 B Capacitance Values
RATED WVDC RATED WVDC RATED WVDC RATED WVDC
CAP. CAP. CAP. CAP. CAP. CAP. CAP. CAP.
TOL. TOL. TOL. TOL.
CODE (pF) CODE (pF) CODE (pF) CODE (pF)
STD. EXT. STD. EXT. STD. EXT. STD. EXT.
0R1 0.1 2R4 2.4 200 20 151 150
B
0R2 0.2 2R7 2.7 220 22 161 160
300
0R3 0.3 3R0 3.0 240 24 181 180
B, C
1000
0R4 0.4 3R3 3.3 270 27 201 200
221 220
0R5 0.5 3R6 3.6 300 30
0R6 0.6 3R9 3.9 B, C, 330 33
241 240
0R7 0.7 4R3 4.3 D 360 36 271 270
0R8 0.8 4R7 4.7 390 39 301 300
0R9 0.9 5R1 5.1 430 43 331 330
200
600
1R0 1.0 5R6 5.6 470 47 500 1500 361 360
1R1 1.1 6R2 6.2 510 51 391 390
F, G, J, F, G, J,
B, C,
500 1500 500 1500
1R2 1.2 6R8 6.8 560 56 K, M 431 430
K, M
D
471 470
1R3 1.3 7R5 7.5 B, C, J, 620 62
1R4 1.4 8R2 8.2 K, M 680 68
511 510
1R5 1.5 9R1 9.1 750 75 561 560
100
1R6 1.6 100 10 820 82 621 620
1R7 1.7 110 11 910 91 681 680
1R8 1.8 120 12 101 100 751 750
300
111 110
1R9 1.9 130 13 F, G, J, 821 820 50
2R0 2.0 150 15 K, M 300 911 910
121 120
2R1 2.1 160 16 131 130 1000 102 1000
2R2 2.2 180 18
VRMS = 0.707 X WVDC
SPECIAL VALUES, TOLERANCES, HIGHER WVDC AND MATCHING AVAILABLE. PLEASE CONSULT FACTORY.
NOTE: EXTENDED WVDC DOES NOT APPLY TO CDR PRODUCTS.
ATC PART NUMBER CODE
ATC100 B 91 0 J W 500 X T
Series
Packaging
T - Tape and Reel, 1000 pc. qty.*
Case Size
TV - Vertical Orientation of Product,
Capacitance Code:
Tape and Reel, 1000 pc. qty.*
First 2 significant digits for capacitance.
I - Special Packaging. Consult Factory.
R=Decimal Point
*Consult ATC for other quantities
Indicates number of zeros following digits
ATC Cap-Pac packaging (100 pc. qty. std.) is also
of capacitance in picofarads except for decimal values.
available.
For this option, leave last field blank.
Capacitance Tolerance
Laser Marking
CAPACITANCE TOLERANCE
WVDC
Code B C D F G J K M
Termination Code
0.1 pF 0.25 pF 0.5 pF 1% 2% 5% 10% 20%
Tol.
The above part number refers to a 100 B Series (case size B) 91 pF capacitor,
J tolerance (5%), 500 WVDC, with W termination (Tin/Lead, Solder Plated over Nickel Barrier), laser marking and Tape and Reel packaging.
ATC accepts orders for our parts using designations with or without the
For additional information and catalogs contact your ATC
ATC prefix. Both methods of defining the part number are equivalent, i.e.,
representative or call direct at (+1-631) 622-4700.
part numbers referenced with the ATC prefix are interchangeable to parts
referenced without the ATC prefix. Customers are free to use either in
Consult factory for additional performance data.
specifying or procuring parts from American Technical Ceramics.
A M E R I C A N T E C H N I C A L C E R A M I C S
ATC North America ATC Europe ATC Asia
sales@atceramics.com saleseur@atceramics.com sales@atceramics-asia.com
www .atceramics.com
2
EXTENDED VOLTAGE EXTENDED VOLTAGE
EXTENDED VOLTAGE EXTENDED VOLTAGE
EXTENDED VOLTAGE
EXT VOLT EXT VOLT
EXT VOLT