12062C102J4Z2A Kyocera AVX

Automotive MLCC General Specifications GENERAL DESCRIPTION AVX Corporation has supported the Automotive Industry requirements for Multilayer Ceramic Capacitors consistently for more than 25 years. Products have been developed and tested specifically for automotive applications and all manufacturing facilities are QS9000 and VDA 6.4 approved. AVX is using AECQ200 as the qualification vehicle for this transition. A detailed qualification package is available on request and contains results on a range of part numbers. HOW TO ORDER 0805 5 A 104 K 4 T 2 A Size Voltage Dielectric Capacitance Failure Terminations Packaging Special Code Capacitance 0402 6.3V = 6 NP0 = A Code (In pF) Rate T = Plated Ni and Sn 2 = 7 Reel A = Std.Product Tolerance 0603 10V = Z X7R = C 2 Sig. Digits + Z = FLEXITERM ** 4 = 13 Reel F = 1% (10pF)* 4=Automotive 0805 16V = Y X8R = F Number of Zeros U = Conductive Epo G = 2% (10pF)* 1206 25V = 3 e.g. 10 F = 106 J = 5% (1F) 1210 **X7R X8R only 35V = D K = 10% 1812 50V = 5 M = 20% 100V = 1 Contact factory for availability of Tolerance Options for Specific Part Numbers. 200V = 2 *NPO only 500V = 7 NOTE: Contact factory for non-specified capacitance values 0402 case size available in T termination only. COMMERCIAL VS AUTOMOTIVE MLCC PROCESS COMPARISON Commercial Automotive Standard Part Numbers. Specific Automotive Part Number. sed to control Administrative No restriction on who purchases these parts. supply of product to Automotive customers. Minimum Ceramic thickness of 0.029 (0.74mm) on Design Minimum ceramic thickness of 0.020 all X7R product. Side & End Margins = 0.004 min Cover Layers = Dicing Side & End Margins = 0.003 min 0.003 min Lot Qualification (Destructive Physical As per EIA RS469 Increased sample plan stricter criteria. Analysis - DPA) Visual/Cosmetic Quality Standard process and inspection 100% inspection Standard sampling for accelerated wave solder Increased sampling for accelerated wave solder on Application Robustness on X7R dielectrics X7R and NP0 followed by lot by lot reliability testing. All Tests have Accept/Reject Criteria 0/1 The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 53 080619Automotive MLCC NP0/X7R Dielectric FLEXITERM FEATURES a) Bend Test The capacitor is soldered to the PC Board as shown: Typical bend test results are shown below: Style Conventional Soft Term 0603 >2mm >5 0805 >2mm >5 1206 >2mm >5 a) Temperature Cycle testing FLEXITERM has the ability to withstand at least 1000 cycles between -55C and +125C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 54 080818