TM ATC 550L Serie S ubC CAPAC i TO r S TM ATC 550L Series UBC Ultra-Broadband Capacitor Features: EIA 0402 Case Size Capacitance: 100 nF Operating Frequency: 16 KHz (-3 dB roll-off) to 40+ GHz* Insertion Loss: < 0.5 dB typical Orientation Insensitive One Piece Construction Voltage Rating: 16 WVDC** RoHS Compliant Terminations Patented Design Gold Terminations Available Applications: Advantages: Optoelectronics/ Ultra-Broadband ATCs new 550L Ultra-Broadband Capacitor is manufac- High Speed Data Performance tured with highest quality materials to provide reliable Transimpedance Ultra-Low and repeatable Ultra-Broadband performance from 16 amplifiers Insertion Loss KHz through 40+ GHz. It exhibits ultra-low insertion loss, ROSA/TOSA Flat Frequency Response flat frequency response and excellent return loss, and is SONET Excellent Return Loss ideal for D.C. Blocking, Coupling, Bypassing and Feedback Broadband Test Unit-to-Unit Performance applications requiring Ultra-Broadband performance. Equipment Repeatability Broadband Microwave/ The 550L is a one-piece orientation-insensitive 0402 SMT Rugged millimeter-wave Ceramic Construction package, fully compatible with high speed automated Receive and Transmit Optical * 25 C, no bias applied pick-and-place manufacturing. It is designed to meet Sub-Assembly the most stringent requirements of Ultra-Broadband ap- ** Operating Temperture dependent Synchronous Optical Network plications. ATC 550L Series Return Loss (S11) ATC 550L Series Insertion Loss (S21) ATC 550L Data Sheet Test Condition Description ATC testing to 40 GHz performed on 10-mil-thick Rogers RO4350 microstrip board, with the device under test subtending a 24 mil gap in a 22-mil-wide center trace (nominal 50-ohm characteristic impedance). Modelithics model developed through testing on several different substrates, including 5-mil-thick Alumina measured through 65 GHz. The modeled results presented for RO4350 were for a pad width of 20 mils and a gap of 16 mils. Modeled data by Modelithics Corp. ATC 001-1066 Rev. H 5/14TM ATC 550L Serie S ub C CAPAC i TO r S Electrical Specifications: Mechanical Dimensions Capacitance: 100 nF Rated Voltage: 0.020 in. 0.004 in. 16 WVDC from -55C to +85C (0.508 mm 0.1 mm) 10 WVDC from -55C to +125C 0.040 in. 0.004 in. Dielectric Withstanding Voltage (DWV): (1.016 mm 0.1 mm) 250% of rated WVDC for 5 secs. Operating Temperature Range: -55C to +125C 0.005 in. 0.002 in. Temperature Coefficient of Capacitance (TCC): (0.128 mm 0.051 mm) 0.024 in. max. 15% (-55C to +85C) (0.610 mm max.) 22% (>85C to +125C) Insulation Resistance: 10 10 min. +25C rated WVDC 9 10 min. +125C rated WVDC ATC PART NUMBER CODE ATC 550 L 104 K T T Series Case Size: (0402) Tape and Reel (standard)* Capacitance Code: Termination Code First 2 significant digits for capacitance T = Tin Plated over Nickel Barrier R=Decimal Point (Standard) CA = Gold Plated over Nickel Barrier Capacitance Tolerance K = 10% *500, 1000, 4000 pieces on 7 reel The above part number refers to a 550 Series (case size L) 100 nF capacitor, K tolerance (10%), with T termination (Tin Plated over Nickel Barrier), tape and reel packaging. ATC accepts orders for our parts using designations with or without the For additional information and catalogs contact your ATC ATC prefix. Both methods of defining the part number are equivalent, representative or call direct at (+1-631) 622-4700. i.e., part numbers referenced with the ATC prefix are interchangeable to parts referenced without the ATC prefix. Customers are free to use Consult factory for additional performance data. either in specifying or procuring parts from American Technical Ceramics. Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document 001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATCs website at www.atceramics. com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. 2009 American Technical Ceramics Corp. All Rights Reserved. ATC 001-1066 Rev. H 5/14