TM ATC 560L SERIES UBC CAPACITORS TM ATC 560L Series UBC Ultra-Broadband Capacitor Features: EIA 0402 Case Size Capacitance: 100 nF Operating Frequency: 16 KHz (-3 dB roll-off) to 40+ GHz* Insertion Loss: < 0.6 dB typical Orientation Insensitive One Piece Construction Voltage Rating: 16 WVDC** RoHS Compliant Terminations Gold Terminations Available Advantages: Applications: Ultra-Broadband Optoelectronics/ ATCs new 560L Ultra-Broadband Capacitor is manufac- Performance High Speed Data tured with highest quality materials to provide reliable Ultra-Low Transimpedance and repeatable Ultra-Broadband performance from 16 Insertion Loss amplifiers KHz through 40+ GHz. It exhibits ultra-low insertion loss, Flat Frequency Response ROSA/TOSA flat frequency response and excellent return loss, and is Excellent Return Loss ideal for D.C. Blocking, Coupling, Bypassing and Feedback SONET applications requiring Ultra-Broadband performance. Unit-to-Unit Performance Broadband Test Repeatability Equipment The 560L is a one-piece orientation-insensitive 0402 Rugged Broadband Microwave/ SMT package, fully compatible with high speed auto- Ceramic Construction millimeter-wave mated pick-and-place manufacturing. It is designed to * 25 C, no bias applied R eceive and Transmit Optical meet the most stringent requirements of Ultra-Broad- Sub-Assembly ** Operating Temperture dependent band applications. Synchronous Optical Network ATC 560L Series Return Loss (S11) ATC 560L Series Insertion Loss (S21) 0 0 -0.2 -10 -0.4 -20 -0.6 -0.8 -30 -1 -40 -1.2 -1.4 -50 (Typical) -1.6 (Typical) -60 -1.8 -70 -2 0 5 10 15 20 25 30 35 40 0 5 10 15 20 25 30 35 40 Frequency (GHz) Frequency (GHz)Frequency (GHz) ATC 560L Data Sheet Test Condition Description ATC testing to 40 GHz performed on 10-mil-thick Rogers RO4350 microstrip board, with the device under test subtending a 24 mil gap in a 22-mil-wide center trace (nominal 50-ohm characteristic impedance). ATC 001-1141 Rev. B 1/18 Magnitude (dB) Magnitude (dB)TM ATC 560L SERIES UBC CAPACITORS Electrical Specifications: Mechanical Dimensions Capacitance: 100 nF Rated Voltage: 0.020 in. 0.004 in. 16 WVDC from -55C to +85C (0.508 mm 0.1 mm) 10 WVDC from -55C to +125C 0.040 in. 0.004 in. Dielectric Withstanding Voltage (DWV): (1.016 mm 0.1 mm) 250% of rated WVDC for 5 secs. Operating Temperature Range: -55C to +125C 0.012 in. typ. Temperature Coefficient of Capacitance (TCC): (0.305 typ.) 0.024 in. max. 15% (-55C to +85C) (0.610 mm max.) 22% (>85C to +125C) Insulation Resistance: 10 10 min. +25C rated WVDC 9 10 min. +125C rated WVDC ATC PART NUMBER CODE ATC 560 L 104 Y T T Series Case Size: (0402) Tape and Reel (standard)* Capacitance Code: Termination Code First 2 significant digits for capacitance T = Tin Plated over Nickel Barrier R=Decimal Point (Standard) CA = Gold Plated over Nickel Barrier Capacitance Tolerance Y = +25%, -20% *500, 1000, 4000 pieces on 7 reel The above part number refers to a 560 Series (case size L) 100 nF capacitor, Y tolerance (+25%, -20%), with T termination (Tin Plated over Nickel Barrier), tape and reel packaging. ATC accepts orders for our parts using designations with or without the For additional information and catalogs contact your ATC ATC prefix. Both methods of defining the part number are equivalent, representative or call direct at (+1-631) 622-4700. i.e., part numbers referenced with the ATC prefix are interchangeable to parts referenced without the ATC prefix. Customers are free to use Consult factory for additional performance data. either in specifying or procuring parts from American Technical Ceramics. Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale (ATC document 001-992 Rev. A 10/03). Copies of these terms and conditions will be provided upon request. They may also be viewed on ATCs website at www.atceramics. com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. 2009 American Technical Ceramics Corp. All Rights Reserved. ATC 001-1141 Rev. B 1/18