Slide-In SIM INTERINTER CONNECTCONNECT 9162-200 The standard SIM connector is specifically designed for handheld devices requir- ing secure subscriber identification. Following on from the introduction of our standard SIM block with an offering of 3 standard heights, 0.80mm, 1.60mm, or 2.40mm, AVX is now adding another standard to the 9162 series SIM connectors, the slide-in SIM. Unlike SIM blocks which require SIM card guides to aid insertion, removal and retention of the SIM card, the slide-in SIM has guides as part of the connector mold design. Contacts are stamped, gold plated, rated 0.5A, and 5000 mechanical cycles. Our contact design is specifically rounded to avoid any possible damage during and after card insertion to the card itself, assuming normal use. The design also incorporates protection features to avoid contact damage during this operation such as contact snagging. Please contact the appropriate sales office for further details of this service. APPLICATIONS FEATURES AND BENEFITS Cellular Phones Produced for use with mini SIM cards. Radios The insulator is molded from high temperature plastic enabling the connector to be used in convection or infrared soldering processes. Supplied on tape and reel packaging for pick and place assembly. The all plastic design, assuming normal use prevents damage to the SIM card on insertion. Optional SMT contact size: Standard SMT contact size 1.60mm x 1.60mm Narrow SMT contact size 1.05mm x 0.60mm RoHS Compliant available. ELECTRICAL ENVIRONMENTAL MECHANICAL Current Rating: 0.5 Amp / Contact Operating Temperature: Insulator Material: Nylon 46 UL94HB Voltage Rating: 50 VAC -55C to +105C Contact Material: Phosphor Bronze Plating: Gold over Nickel Durability: 5,000 Cycles HOW TO ORDER 00 9162 006 2X 6 175 Prefix Series Number of SIM Type Plating Option Connector Height Contacts 20 = Standard SMT Foot 6 = Selective Gold 175 = 1.750mm Slide-in SIM Reader Pure Tin Tails See pages 2 & 3 21 = Narrow SMT Foot Slide-in SIM Reader 1Slide-In SIM INTERINTER CONNECTCONNECT 9162-200 WIDE SMT FOOT VERSION SECTION Y-Y SECTION Z-Z SECTION T-T DETAIL A CONTACT FUNCTIONS (ISO78161): PART SECTION Z-Z 1. SSUPPLY VOLTAGE Vcc. ROTATED THRO 90 2. RESET 3. CLOCK 4. GROUND 5. PROGRAM VOLTAGE Vpp. 6. I/0 PAD LAYOUT NOTES: 1. SALES DRAWING FOR SLIDE IN SIM READER. 2. FOR PRODUCT SPECIFICATION REFER TO ELCO SPEC. 201-01-085. 3. GENERAL TOLERANCE 0.20 UNLESS OTHER- WISE STATED. 4. INSULATOR MATERIAL:NYLON GLASS FILLED. 5. CONTACT MATERIAL COPPER ALLOY: SIM CONTACTS NOSE PLATED WITH GOLD, SMT PADS PLATED WITH PURE TIN. 6. PACKING DETAILS SEE PAGE 4. 2