FE52N6J0506KB Kyocera AVX

DC FILTERING FE* RoHS Compliant GENERAL DESCRIPTION The FE series uses a non-impregnated metallized polypropylene dielectric specially treated to have a very high dielectric strength in o operation condition up to 105 C. FE series performance characteristics make them a viable alternative to aluminum electrolytic technology due to much lower ESR and much higher surge voltage capability (dv/dt). GENERAL CHARACTERISTICS Able to Withstand Harsh Environment Conditions Low Profile Available FEATURES & BENEFITS High Performance DC Filter Low ESR, High Peak & RMS Current THB Compliance Able to Withstand Harsh Environment Conditions (THB Compliance) Low Profile Available DIMENSIONS APPLICATIONS Renewable Energy Inverter OBC & Automotive Applications Motor Drives Industrial Power Supply UPS System OPERATING TEMPERATURE RANGE Operating temperature range: -40C to +100C PACKAGING MATERIAL Self-extinguishing plastic case (V0 = in accordance with UL 94) filled thermosetting resin. STANDARDS Self-extinguishing thermosetting resin (V0 = in accordance with UL 94 I3F2 = in accordance with NF F 16-101). IEC 61071-1: Power electronic capacitors IEC 61071-2: Power electronic capacitors IEC 60384-16: Fixed metallized polypropylene film dielectric DC LIFE EXPECTANCY capacitors One unique feature of this technology (versus aluminum electrolytics) is IEC 60384-16-1: Fixed metallized polypropylene film dielectric DC how the capacitor reacts at the end of its lifetime. capacitors Assessment level E Unlike aluminum electrolytic film capacitors do not have a catastrophic IEC 60384-17: Fixed metallized polypropylene film dielectric AC failure mode. Film capacitors simply experience a parametric loss of and pulse capacitors capacitance of about 2% from initial value, with no risk of short circuit. IEC 60384-17-1: Fixed metallized polypr opylene film dielectric AC and pulse capacitors The capacitor continues to be functional even after this 2% decrease. HOW TO ORDER FE 27 G* 6 K 0685 K A Type Series Pitch Case Size Voltage Cap Tolerance Pitch P2 FE 27 = 27.5mm E* for P=27.5mm 6 = Polypropylene I = 450V F Code J = 5% A = 10.2 7 = Polypropylene THB 37 = 37.5mm F* for P=37.5mm H = 500V K = 10% B = 20.3 52 = 52.5mm G* for P=52.5mm 8 = Polypropylene Low Profile J = 550V Q = 600V A = 700V B = 800V C = 900V K = 1000V L = 1100V P = 1200V The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 19 110920DC FILTERING FE* RoHS Compliant POLYPROPYLENE DIELECTRIC FOR INDUSTRIAL DC FILTERING These capacitors have been designed primarily for high and medium power DC filtering applications. ELECTRICAL CHARACTERISTICS POLYPROPYLENE DIELECTRIC Items Characteristics Application DC Filtering / DC Link Reference Standard IEC 61071 Climatic Category 40/85/56 IEC 60068-1 Operating Temperature Range -40~ +105C (+85C observing voltage must be de-rating at 1.35% per C) Upper Temperature Tmax +85C Lower Temperature Tmin -40C Rated Voltage 450Vdc ~ 1200Vdc Capacitance Range 5F ~ 1500F Capacitance Tolerance 5% or 10% at +25C 0.002 (0.20%) at 1 KHz. C20F at +25C Dissipation Factor (DF) 0.003 (0.30%) at 1 KHz. C>20F at +25C Test Voltage Between Terminals 1.5 x rated voltage for 10s (terminal to terminal) Test Voltage Terminal to Case 3.0kVrms 50 Hz for 10 sec at +25C Insulation Resistance IR x C30,000 Seconds at 100VDC 1 minute at +25C Life Expectancy 100,000 hours at Un Hot-Spot temperature T=+70C Solvent resistant plastic case UL94 V-0 Protection Thermosetting resin sealing UL 94 V-0 compliant Installation Any position Leads Tinned copper wires, standard lead wire length 5 1mm Packaging Packed in cardboard boxes with protection for the terminals RoHS Compliant Compliant with the restricted substance requirements of Directive 2011/65/EU Storage time: 24 months from the date marked on the label package Storage Conditions Temperature and relative humidity should be -10C ~ +40C and not more than 75%RH. RH 85% for 30 days randomly distributed throughout the year Test conditions & performance: Temperature: +40C2C Relative humidity (RH): 93% 2% Humidity Test Test duration: 56 days Capacitance change: 5% DF change (tg): 50 X 10-4 at 1KHz Insulation resistance: 50% of initial limit Test conditions & performance: Temperature: +85C2C Voltage applied: 1.3 X VR (d.c.) Endurance Test Test duration: 1000 hours Capacitance change: 5% DF change ( tg): 50 X 10-4 at 1KHz Insulation resistance: 50% of initial limit The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 20 051220