TBJ SERIES DLA Dwgs 07016 & 95158 The DLA 07016 & 95158 famalies, based on solder plated, fused solder plated, hot solder the CWR11 form factor, are high reliability dipped and gold plated (these correspond to H, series encompassing the current range of EIA K, C and B termination, respectively, per MIL- Low ESR ratings. DLA 07016 has the widest PRF-55365). range of case sizes, capacitance / voltage The molding compound has been selected ratings, and is offered with Weibull Grade B, to meet the requirements of UL94V-0 (Flame C, and reliability with all MIL-PRF-55365 Retardancy) and outgassing requirements of surge test options (A, B & C). ASTM E-595. For Space Level applications, AVX SRC9000 For moisture sensitivity levels please refer to the qualification is recommend. Please refer to High Reliability Tantalum MSL section located the TBJ COTS-Plus SRC9000 datasheet for in the back of the High Reliability Tantalum part number availability. Catalog. L W There are four termination finishes available: H CASE DIMENSIONS: millimeters (inches) EIA EIA L0.20 W+0.20 (0.008) H+0.20 (0.008) W 0.20 A+0.30 (0.012) 1 A S A W Code S Min. 1 Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008) A 1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043) MARKING B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) (Brown marking on gold body) C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) Polarity Stripe (+) D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) Capacitance Code E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) Rated Voltage V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.122) 1.30 (0.051) 4.40 (0.173) Manufacturers ID W dimension applies to the termination width for A dimensional area only. 1 Lot Number CAPACITANCE AND RATED VOLTAGE, V (MIL VOLTAGE CODE) RANGE R LETTER DENOTES CASE SIZE (ESR LIMITS IN PARENTHESES) Capacitance Rated Voltage DC (V ) at 85C R F Code 4V (G) 6V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T) 0.15 154 A(15000) 0.22 224 A(18000) 0.47 474 A(12000) A(9500)/B(9500) 0.68 684 A(10000) A(8000) A(7900) 1.0 105 A(8000) A(7500) A(6600)/B(7000) 1.5 155 A(6500) A(3000, 7500) A(7500)/B(5200) C(2000)/D(1500) 2.2 225 A(5500) A(3000) A(7000)/B(2000) B(2000) D(1200) 3.3 335 A(8000) A(3500, 5000) B(2000) B(1000) D(800) A(1800, 4000) A(3100) B(1500) 4.7 475 A(6000) A(5000) A(2000) D(300) B(1000) B(700,1500) C(600)/D(450) B(700, 2800) C(350)/D(400) 6.8 685 A(5000) A(4000) A(1500/B(1200) B(1000) D(300, 600) C(700) E(300) B(500, 1000) C(1600)/D(125, 300) 10 106 A(4000) A(1800, 3000) A(3000)/B(900) C(300, 500) C(700) E(250) A(1000, 3200) B(500)/C(450) C(450)/D(100, 300) 15 156 A(3500) B(500, 800) D(275)/E(200) B(600) D(275) E(225) B(500, 700) B(500, 600) B(600)/C(400) C(275, 400) D(125, 400) 22 226 A(3000)/B(600) C(300) C(150, 375) D(275) D(100, 200)/E(225) E(125, 300) A(700)/B(425, 650) C(100, 300) C(300) D(90, 300) D(200, 300) 33 336 A(3000) B(600) C (500) D(250) D(100, 200) E(100, 175) E(300) C(200, 350) C(110, 350) D(100, 200) 47 476 C(300) D(175, 250) E(250)/V(200) D(200) D(80, 200) E(150) B(500)/C(200) C(80, 300) D(70, 200) 68 686 A(1500) D(150) V(95) D(175) D(150)/E(150) E(150, 200) A(1400) C(75, 200) D(50, 125) 100 107 C(75, 150) V(60) B(900) D(50, 100)/E(100) E(125) 150 157 D(125)/E(125) D(50, 100)/E(100) D(60, 150)/V(45) D(100, 125) D(50, 150) 220 227 V(50) E(100) E(50, 100) D(50, 150) 330 337 E(50,150) E(50, 100)/V(40) 470 477 E(50, 200)/V(40) E(50, 200)/V(40) 1000 108 E(200) NOTE: EIA standards for Low ESR solid tantalum capacitors allow an ESR movement of 1.25 times initial limit post mounting. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 62 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 091520TBJ SERIES DLA Dwgs 07016 & 95158 HOW TO ORDER DLA DWG P/N: 07016 -001 K B C A DLA DWG Dash Capacitance Reliability Termination Finish Surge Test Number Tolerance Grade Option 07016 B = Gold Plated (10 microinch minimum) K = 10% B = B Weibull See Rating A = 10 cycles,+25C H = Solder Plated (50 microinch minimum) M = 20% C = C Weibull B = 10 cycles, Tables C = Hot Solder Dip (60 microinch minimum) D = D Weibull -55C & +85C *For Gold Plated Termination Finish, contact C = 10 cycles, the factory for availability. -55C & +85C before Weibull Z = None required Per MIL-PRF-55365 LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. 95158 -01 K H DLA DWG Dash Capacitance Termination Finish Number Tolerance B = Gold Plated (10 microinch minimum) 95158 K = 10% H = Solder Plated (100 microinch See Rating M = 20% minimum) Tables *For Gold Plated Termination Finish, contact the factory for availability. LEAD-FREE COMPATIBLE COMPONENT For RoHS compliant products, please select correct termination style. TECHNICAL SPECIFICATIONS Technical Data: Unless otherwise specified, all technical data relate to an ambient temperature of 25C Capacitance Range: 0.15 F to 1000 F Capacitance Tolerance: 10% 20% Rated Voltage (V ) 85C: 4 6 10 16 20 25 35 50 R Category Voltage (V ) 125C: 2.7 4 7 10 13 17 23 33 C Surge Voltage (V ) 85C: 5.2 8 13 20 26 32 46 65 S Surge Voltage (V ) 125C: 3.4 5 8 12 16 20 28 40 S Temperature Range: -55C to +125C The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or 63 available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 042621