PASSIVE COMPONENTS
for the Internet of Things
Capacitors, Inductors,
Circuit Protection, Saw Filters,
Crystal Units, Tuning Forks
AVX Ordering PN: KIT-IOTIOT DESIGN KIT
Most IoT MCU chips currently require an input voltage
filtering/decoupling network, a timing device network,
and an output impedance matching network for the RF
antenna, which usually communicates using Bluetooth
LE, ZigBee, ANT, or other wireless network protocol.
AVX provides passive components suitable for use in
all required networks of operation for IoT devices. The
diagram below shows an example of a possible use for
the components in this kit to get the most out of your
IoT device.
RF Matching, DC Blocking
Input Filtering & Decoupling
and High Frequency Circuit Protection
loT
Chip
Crystal Loading
Each of these blocks represents an example of how
your IoT device might be set up, and all the passive
components shown here are included in this kit.
For design suggestions, part recommendations, or
other assistance, please contact your local AVX
sales office, visit us at www.avx.com, or call us at
(864) 967-2150.
1