W B Accu-L SMD High-Q RF Inductor 2 10 nH Inductor (Top View) ACCU-L TECHNOLOGY The Accu-L SMD Inductor is based on thin-film mul ti lay er The Accu-L inductor is particularly suited for the tele com - technology. This technology provides a level of control on the mu ni ca tions industry where there is a continuing trend elec tri cal and physical characteristics of the com po nent which towards miniaturization and in creas ing frequencies. The gives consistent characteristics within a lot and lot-to-lot. Accu-L inductor meets both the per for mance and tolerance requirements of present cellular frequencies 450MHz and The original design provides small size, excellent high- 900MHz and of future fre quen cies, such as 1700MHz, frequency performance and rugged construction for re li able 1900MHz and 2400MHz. automatic assembly. FEATURES APPLICATIONS High Q Mobile Communications RF Power Capability Satellite TV Receivers High SRF GPS Low DC Resistance Vehicle Locations Systems Ultra-Tight Tolerance on Inductance Filters Standard 0603 and 0805 Chip Size Matching Networks Low Profile Rugged Construction Taped and Reeled Operating/Storage DIMENSIONS: millimeters (inches) 0603 0805 Temp. Range: 1.60.10 2.110.10 L (0.0630.004) (0.0830.004) -55C to +125C 0.810.10 1.50.10 W (0.0320.004) (0.0590.004) 0.610.10 0.910.13 T (0.0240.004) (0.0360.005) T top: 0.0 +0.3/-0.0 0.250.15 (0.0+0.012) (0.0100.006) L B bottom: 0.350.20 (0.0140.008) 36 Accu-L 0603 and 0805 SMD High-Q RF Inductor HOW TO ORDER L 0805 4R7 D E S TR Product Size Termination Packaging Inductance Tolerance Specification Code Code Inductor 0603 Expressed in nH for Code W = Nickel/ TR = Tape and Reel 0805 (2 significant digits + L 4.7nH, E = Accu-L 0805 solder coated (3,000/reel) number of zeros) B = 0.1nH technology (Sn 63, Pb 37) for C = 0.2nH G = Accu-L 0603 **S = Nickel/ values <10nH, D = 0.5nH technology Lead Free letter R denotes Solder coated decimal point. 4.7nH<L<10nH, (Sn100) Not RoHS Compliant Example: C = 0.2nH 22nH = 220 D = 0.5nH **RoHS compliant 4.7nH = 4R7 2 L 10nH, G = 2% J = 5% Engineering Kits Available LEAD-FREE COMPATIBLE COMPONENT see pages 114-115 For RoHS compliant products, please select correct termination style. ELECTRICAL SPECIFICATIONS TABLE FOR ACCU-L 0603 450 MHz 900 MHz 1900 MHz 2400 MHz IDC max Test Frequency Test Frequency Test Frequency Test Frequency (mA) SRF min RDC max Inductance Q Q Q Q Available (MHz) () L (nH) L (nH) L (nH) L (nH) Typical Typical Typical Typical Inductance Tolerance (1) 1.2 49 1.2 70 1.2 134 1.2 170 10000 0.04 1000 0.1, 0.2nH 1.5 0.1, 0.2nH 26 1.54 39 1.52 63 1.52 76 10000 0.06 1000 1.8 0.1, 0.2nH 20 1.74 30 1.73 50 1.72 59 10000 0.07 1000 2.2 0.1, 0.2nH 20 2.2 30 2.24 49 2.24 56 10000 0.08 1000 2.7 0.1, 0.2nH 21 2.7 30 2.75 48 2.79 54 9000 0.08 750 3.3 0.1, 0.2, 0.5nH 24 3.33 35 3.39 56 3.47 64 8400 0.08 750 3.9 0.1, 0.2, 0.5nH 25 3.9 57 4.06 60 4.21 69 6500 0.12 500 4.7 0.1, 0.2, 0.5nH 23 4.68 32 4.92 46 5.2 49 5500 0.15 500 5.6 0.2, 0.5nH 26 5.65 36 5.94 54 6.23 60 5000 0.25 300 6.8 0.2, 0.5nH 23 6.9 33 7.3 47 8.1 39 4500 0.30 300 8.2 0.2, 0.5nH 23 8.4 31 10 35 12.1 31 3800 0.35 300 10.0 2%, 5% 28 10 39 11.8 47 14.1 41 3500 0.45 300 12.0 2%, 5% 28 13.2 38 14.1 30 17.2 20 3000 0.50 300 15.0 2%, 5% 28 16.2 38 25.9 30 49.8 15 2500 0.60 300 (1) I measured for 15C rise at 25C ambient temperature when soldered to FR-4 board. Inductance and Q measured on Agilent 4291B / 4287 using the 16196A test fixture. DC ELECTRICAL SPECIFICATIONS TABLE FOR ACCU-L 0805 450 MHz 900 MHz 1700 MHz 2400 MHz IDC max Test Frequency Test Frequency Test Frequency Test Frequency (mA) SRF min RDC max Inductance Q Q Q Q T = 15C T = 70C Available (MHz) () L (nH) L (nH) L (nH) L (nH) Typical Typical Typical Typical Inductance Tolerance (1) (2) 1.2 60 1.2 92 1.2 122 1.2 92 10000 0.05 1000 2000 0.1nH, 0.2nH, 0.5nH 1.5 0.1nH, 0.2nH, 0.5nH 50 1.5 74 1.5 102 1.5 84 10000 0.05 1000 2000 1.8 0.1nH, 0.2nH, 0.5nH 50 1.8 72 1.8 88 1.9 73 10000 0.06 1000 2000 2.2 0.1nH, 0.2nH, 0.5nH 42 2.2 62 2.2 82 2.3 72 10000 0.07 1000 2000 2.7 0.1nH, 0.2nH, 0.5nH 42 2.7 62 2.8 80 2.9 70 10000 0.08 1000 2000 3.3 0.1nH, 0.2nH, 0.5nH 38 3.3 46 3.4 48 3.5 57 10000 0.11 750 1500 3.9 0.1nH, 0.2nH, 0.5nH 27 3.9 36 4.0 38 4.1 42 10000 0.20 750 1500 4.7 0.1nH, 0.2nH, 0.5nH 43 4.8 62 5.3 76 5.8 60 5500 0.10 750 1500 5.6 0.5nH 50 5.7 68 6.3 73 7.6 62 4600 0.10 750 1500 6.8 0.5nH 43 7.0 62 7.7 71 9.4 50 4500 0.11 750 1500 8.2 0.5nH 43 8.5 56 10.0 55 15.2 32 3500 0.12 750 1500 10 2%, 5% 46 10.6 60 13.4 52 2500 0.13 750 1500 12 2%, 5% 40 12.9 50 17.3 40 2400 0.20 750 1500 15 2%, 5% 36 16.7 46 27 23 2200 0.20 750 1000 18 2%, 5% 30 21.9 27 1700 0.35 500 1000 22 2%, 5% 36 27.5 33 1400 0.40 500 1000 (1) I measured for 15C rise at 25C ambient temperature L, Q, SRF measured on HP 4291A, Boonton 34A and Wiltron 360 DC (2) I measured for 70C rise at 25C ambient temperature Vector Analyzer, R measured on Keithley 580 micro-ohmmeter. DC DC 37