NPVV477M004R0003 Kyocera AVX

CoreCap NPV Series NbO - Ceramic Multianode Chip Capacitors NPV MULTIANODE Multi-anode construction CONSTRUCTION Super low ESR Non-burn safe technology 3x reflow 260C compatible V-Core filtering and power supply applications (e.g. servers, notebooks etc.) CV range: 330-560F / 2.5-4V CASE DIMENSIONS: millimeters (inches) L W EIA EIA L0.20 W+0.20 (0.008) H+0.20 (0.008) W0.20 A+0.30 (0.012) 1 Code S Min. Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008) H V 2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.120) 1.30 (0.051) 4.40 (0.173) W1 dimension applies to the termination width for A dimensional area only. AAS W 1 For part marking see page 130 HOW TO ORDER NPV V 567 M 002 0003 Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging ESR in m 002=2.5Vdc See table pF code: 1st two digits M=20% R = Pure Tin 7 Reel 004=4Vdc above represent significant figures, S = Pure Tin 13 Reel 3rd digit represents multiplier TECHNICAL SPECIFICATIONS Technical Data: All technical data relate to an ambient temperature of +25C Capacitance Range: 330 F to 560 F Capacitance Tolerance: 20% Leakage Current: 0.02CV (CV = capacitance x voltage) Voltage Range (V ) +85C: 2.5 4 R Category Voltage (V ) +105C: 1.7 2.7 C Temperature Range: -55C to +105C with category voltage ESL: Typically 2.5nH below 10MHz Reliability: 0.2% per 1000 hours at 85C, 1xV with 0.1/V series impedance R with 60% confidence level 91 CoreCap NPV Series NbO - Ceramic Multianode Chip Capacitors CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated Voltage DC to 85C / 0.66 Vr to 125C LEAD-FREE COMPATIBLE COMPONENT F Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 330 337 V (3) 470 477 V (3) 560 567 V (3) 680 687 1000 108 Available Ratings, (ESR ratings in mOhms in brackets) Engineering samples - please contact manufacturer *Codes under development - subject to change Note: Voltage ratings are minimum values. AVX reserves the right to supply NON-BURN higher ratings in the same case size, to the same reliability standards. NON-SMOKE RATINGS & PART NUMBER REFERENCE Rated DCL DF ESR 100kHz RMS Current (mA) 100kHz RMS Voltage (mV) AVX Case Capacitance Voltage (A) % Max. (m) MSL 25C 85C 125C 25C 85C 125C Part No. Size (F) (V) Max. Max. 300kHz 2.5 Volt 85C (1.7 Volt 105C) NPVV567M002 0003 V 560 2.5 28 6 3 3 4619 4157 1848 14 12 6 4 Volt 85C (2.7 Volt 105C) NPVV337M004 0003 V 330 4 26.4 6 3 3 4619 4157 1848 14 12 6 NPVV477M004 0003 V 470 4 37.6 6 3 3 4619 4157 1848 14 12 6 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. The EIA & CECC standards for low ESR solid Tantalum Capacitors allow an ESR movement to 1.25 times catalog limit post mounting. For typical weight and composition see page 123. NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards. ESR VS FREQUENCY PLOTS TYPICAL Impedance ESR 10000 1000 1000 100 100 10 10 1 1 100 1000 10000 100000 1000000 100 1000 10000 100000 1000000 Frequency (Hz) Frequency (Hz) 92 ESR (mOhms) ESR (mOhms)