TAP336K016BRW Kyocera AVX

SECTION 3: LEADED TANTALUM Introduction Introduction Foreword AVX offers a broad line of solid Tantalum capacitors in a wide And if the customer requirements are outside our standard testing, range of sizes, styles, and ratings to meet any design needs. This AVX will work with you to define and implement a test or screening catalog combines into one source AVXs leaded tantalum capacitor plan. information from its worldwide tantalum operations. AVX is determined to become the world leader in tantalum capacitor The TAP/TEP is rated for use from -55C to +85C at rated voltage technology and has made, and is continuing to make, significant and up to +125C with voltage derating. There are three preferred investments in equipment and research to reach that end. We wire forms to choose from which are available on tape and reel, and believe that the investment has paid off with the devices shown on in bulk for hand insertion. the following pages. AVX has a complete tantalum applications service available for use by all our customers. With the capability to prototype and mass produce solid tantalum capacitors in special configurations, almost any design need can be fulfilled. Dipped Radial Capacitors SOLID TANTALUM RESIN DIPPED SERIES TAP/TEP The TAP/TEP resin dipped series of miniature tantalum capacitors is available for individual needs in both commercial and professional applications. From computers to automotive to industrial, AVX has a dipped radial for almost any application. Tantalum Graphite Resin encapsulation Tantalum wire Terminal Wire Silver Solder Manganese dioxide Tantalum pentoxide The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 230Dipped Radial Capacitors TAP/TEP Series Wire Form Outline Dipped Radial Capacitors Wire Form Outline SOLID TANTALUM RESIN DIPPED TAP/TEP Preferred Wire Forms D D D Figure 1 Figure 2 Figure 3 Wire Form C Wire Form B Wire Form S 2.0(0.08) H H + 4 (0.16) H 1 max 1 max + + L L S L S S d d 2 (0.079) 2.0 (0.079) d min min Non-Preferred Wire Forms (Not recommended for new designs) Figure 4 FigureD 5 Figure 6 D D H max H + 3.8 (0.15) 1 H max +0.118 + (3.0) 0.079 (2) L L +0.25 min 1.10 -0.10 L S +0.010 S (0.4 ) -0.004 d d S Wire Form F Wire Form D Wire Form G DIMENSIONS millimeters (inches) Packaging Wire Form Figure Case Size L (see note 1) S d Suffixes Available* Preferred Wire Forms CCS Bulk 16.04.00 5.001.00 0.500.05 C Figure 1 A - R* CRW Tape/Reel (0.6300.160) (0.2000.040) (0.0200.002) CRS Tape/Ammo 16.04.00 5.001.00 0.500.05 BRW Tape/Reel B Figure 2 A - J* (0.6300.160) (0.2000.040) (0.0200.002) BRS Tape/Ammo SCS Bulk 16.04.00 2.500.50 0.500.05 S Figure 3 A - J* SRW Tape/Reel (0.6300.160) (0.1000.020) (0.0200.002) SRS Tape/Ammo Non-Preferred Wire Forms (Not recommended for new designs) 3.900.75 5.000.50 0.500.05 F Figure 4 A - R FCS Bulk (0.1550.030) (0.2000.020) (0.0200.002) DCS Bulk 16.04.00 2.500.75 0.500.05 D Figure 5 A - H* DTW Tape/Reel (0.6300.160) (0.1000.020) (0.0200.002) DTS Tape/Ammo 16.04.00 3.180.50 0.500.05 G Figure 6 A - J GSB Bulk (0.6300.160) (0.1250.020) (0.0200.002) Similar to 16.04.00 6.351.00 0.500.05 H A - R HSB Bulk Figure 1 (0.6300.160) (0.2500.040) (0.0200.002) Notes: (1) Lead lengths can be supplied to tolerances other than those above and should be specified in the ordering information. (2) For D, H, and H1 dimensions, refer to individual product on following pages. * For case size availability in tape and reel, please refer to pages 253-254. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 231 040920