TM J-CAP Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors FEATURES Highest Energy per volume Fast DCL drop with Voltage applied after reflow Benign failure mode under recommended use conditions LEAD-FREE COMPATIBLE Low ESR COMPONENT Undertab terminations layout: - High Volumetric Efficiency - Low profile case sizes - High capacitance in smaller dimensions - Close positioning of several parts for efficient high density PCB layout 3x reflow 260C compatible APPLICATIONS Power backup for SSDs (MLC, SLC, EFD, PCIe), battery-powered portable equipment, industrial alarms, smart power meters, and mobile devices. J-LEAD UNDERTAB Polarity Band (Anode+) Polarity Band (Anode+) W L W W L W H H WP AP S AN WN W A S A W P P N N CASE DIMENSIONS Undertab: millimeters (inches) EIA EIA L0.20 W+0.20 (0.008) W 0.10 W 0.10 A 0.10 A 0.10 P N P N Code H max. S Min. Code Metric (0.008) -0.10 (0.004) (0.004) (0.004) (0.004) (0.004) L 1210 3528-10 3.50 (0.138) 2.80 (0.110) 1.00 (0.039) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) T 1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) 2.50 (0.098) 2.10 (0.083) 1.15 (0.045) 1.35 (0.053) 1.00 (0.039) X 2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) 3.25 (0.128) 3.25 (0.128) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) 4 2924 7361-20 7.30 (0.287) 6.10 (0.240) 2.00 (0.079) 4.75 (0.187) 4.75 (0.187) 2.00 (0.079) 3.20 (0.126) 2.10 (0.083) CASE DIMENSIONS J-lead: millimeters (inches) MAXIMUM ENERGY EIA EIA L0.20 W+0.20 (0.008) H+0.20 (0.008) W 0.20 A+0.30 (0.012) 1 PER CASE SIZE Code S Min. Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008) Case H Max Max Energy C 2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114) Size (mm) (mJ) D 2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) C 2.8 5.8 E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) D 3.1 21.8 H 1210 3528-15 3.50 (0.138) 2.80 (0.110) 1.50 (0.059) max. 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) E 4.3 11.9 H 1.5 2.6 5 2917 7343-40 7.30 (0.287) 4.30 (0.169) 3.80 (0.150) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) L 1.0 1.8 W1 dimension applies to the termination width for A dimensional area only. T 1.2 6.5 X 1.5 18.2 MARKING 4 2.0 43.0 4 CASE C, D, E, H, L, T, X, 5 CASE 5 4.0 46.6 AVX LOGO AVX LOGO Polymer Capacitance Value in pF Polymer Capacitance Value in pF 158 = 1500F 156 = 15F Polarity Polarity Rated Voltage Rated Voltage 158 J 156 J Band Band J = 6.3V J = 6.3V (Anode+) (Anode+) ID Code ID Code XXXXX XXXXX AVX LOGO AVX LOGO Polymer Capacitance Value in pF Polymer Capacitance Value in pF 157 = 150F 107 = 100F Polarity Polarity Rated Voltage Rated Voltage 157 C 107 V Band Band C = 16V V = 35V (Anode+) (Anode+) ID Code ID Code XXXXX XXXXX HOW TO ORDER TCN 4 158 M 006 0055 E R Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging ESR in m Additional TCJ See table pF code: 1st two digits M = 20% R = Pure Tin 7 Reel Character 006 = 6.3Vdc 025 = 25Vdc TCN above represent significant figures, S = Pure Tin 13 Reel E = Black resin 010 = 10Vdc 035 = 35Vdc 3rd digit represents multiplier (J-Lead) 016 = 16Vdc 050 = 50Vdc (number of zeros to follow) 020 = 20Vdc 220 042619TM J-CAP Series Highest Joules/cc Conductive Polymer Solid Electrolytic Chip Capacitors TECHNICAL SPECIFICATIONS Technical Data: All technical data relate to an ambient temperature of +25C Capacitance Range: 4.7 F to 1500 F Capacitance Tolerance: 20% Leakage Current DCL: 0.1CV Rated Voltage (V ) +85C: 6.3 10 16 20 25 35 50 R Surge Voltage (V ) +85C: 8 13 21 26 33 46 65 S Temperature Range: -55C up to +125C Reliability: 1% per 1000 hours at 85C, V with 0.1/V series impedance R 60% confidence level NOTE: Conductive Polymer Capacitors are designed to operate within the limits of the environmental conditions specified for each series. If operated continuously at their maximum temperature and / or humidity limit, or beyond these limits, capacitors may exhibit a parametric shift in capacitance and increases in ESR. These changes may occur earlier if the specified environmental conditions are exceeded. Similarly, their normal operational time period will be significantly extended if their general duty cycle includes operation below maximum temperature within humidity controlled environments. Careful attention should be paid to maximum temper- ature with associated high humidity environments as well as voltage derating, ripple current and current surges. Please reference the AVX Conductive Polymer Capacitor Guidelines for more information or contact factory for application assistance. CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated Voltage DC to 85C, mJ F Code 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T) L(300) 4.7 475 1.8 T(200E) 6.8 685 C(200) 5.4 10 106 T(200E) 3.9 D(120) 8.0 15 156 C(200) 5.8 E(70) 11.9 22 226 T(200E) 4.3 D(100) 8.5 H(150E) 33 336 3.3 T(250E) 6.5 D(70) 12.8 T(200E) C(100) T(200) 47 476 1.7 4.7 X(100) 9.2 X(150E) 18.2 H(100E) T(150E) 68 686 H(100E) 0.8 D(45) 2.5 D(50) 6.7 D(55) 8.4 D(70) 13.3 D(70) 100 107 D(45) 3.6 D(50) 9.9 D(55) 12.4 19.6 4(100E) 38.8 4(100) 150 157 T(200E) 1.7 D(45) 5.4 X(100E) 14.9 4(70) 29.3 D(50) 220 227 H(170) 2.6 D(40) 7.9 21.8 4(100) 27.2 4(100E) 43.0 4(70) 4(70E) 330 337 D(40) 3.8 5(100) 11.9 32.7 5(100) 470 477 X(50) 5.4 5(100) 46.6 1000 108 4(55) 11.6 1500 158 4(55) 17.4 Not recommended for new designs higher voltage or smaller case size alternatives are available. Released ratings, (ESR ratings in mOhms in parentheses) Energy in mJ Engineering samples - please contact AVX Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. 042619 221