THJ Extended Series High Temperature (200C max.) - J-Lead THJ Extended Series High Temperature (200C max.) - J-Lead FEATURES SMD 200C Tantalum Capacitor 200C 0.33VR 1000hrs Continuous Operation Leakage Current After 200C 1000hrs Less than 1mA LEAD-FREE COMPATIBLE 3x Reflow 260C COMPONENT 100% Surge Current Tested Gold Plated Termination for Hybrid Assembly Oil Drilling, Aerospace, Automotive Applications CV Range: 10-220F / 10-16V 2 Case Sizes Available APPLICATIONS Downhole Drilling CASE DIMENSIONS: millimeters (inches) EIA EIA L0.20 W+0.20 (0.008) H+0.20 (0.008) W 0.20 A+0.30 (0.012) 1 Code S Min. Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008) B 1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055) E 2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173) MARKING W dimension applies to the termination width for A dimensional area only. 1 B, E CASE HOW TO ORDER THJ E 107 * 016 JH Type Case Size Capacitance Code Tolerance Rated DC Voltage Packaging Standard Additional See table pF code: 1st two digits K = 10% A = Gold Plating 7 Reel 010 = 10Vdc Suffix characters may be above represent significant figures M = 20% B = Gold Plating 13 Reel 016 = 16Vdc added for special 3rd digit represents multiplier requirements (number of zeros to follow) V = Dry pack Option TECHNICAL SPECIFICATIONS Technical Data: All technical data relate to an ambient temperature of +25C Capacitance Range: 10 F to 220 F Capacitance Tolerance: 10% 20% Leakage Current DCL V 25C 0.01CV R Leakage Current DCL V 200C, 1000 hrs 1mA C Rated Voltage (V ) +85C: 10 16 R Category Voltage (V ) +200C: 3.3 5.3 C Surge Voltage (V ) +85C: 13 20 S Surge Voltage (V ) +200C: 4.3 6.5 S Temperature Range: -55C up 200C with voltage derating Reliability: 0.5% per 1000 hours at 85C, V with 0.1/V series impedance, R 1000 hrs at 200C, 0.33V R Termination Finished: Gold Plating The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 133 102720THJ Extended Series High Temperature (200C max.) - J-Lead CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance Rated voltage (V ) to 85C (Voltage Code) R F Code 10V (A) 16V (C) 10 106 B 15 156 100 107 E 150 157 220 227 E Released ratings Note: Voltage ratings are minimum values. AVX reserves the right to supply higher voltage ratings in the same case size, to the same reliability standards. RATINGS & PART NUMBER REFERENCE DCL Max. ESR 100kHz RMS Current (mA) Rated Rated Category Category DCL Max. DF AVX Case Capacitance VC 200C Max. Voltage Temperature Voltage Temperature V 25C Max. MSL R Part No. Size (F) 1000 hrs 100kHz (V) (C) (V) (C) (A) (%) 25C 85C 175C 200C (mA) () 10 Volt 85C 1) THJE227*010 JH E 220 10 85 3.3 200 22 1.0 10 0.25 812 731 162 81 1 16 Volt 85C THJB106*016 JH B 10 16 85 5.3 200 1.6 1.0 6 2.8 174 157 35 17 1 1) THJE107*016 JH E 100 16 85 5.3 200 16 1.0 8 0.25 812 731 162 81 1 Moisture Sensitivity Level (MSL) is defined according to J-STD-020. All PNs also available with Dry pack option - MSL 3 (see How to order). 1) Dry pack option (see How to order) recommended for reduction of stress during soldering. Base terminations material is copper for E case size and Nilo42 for B case size. All technical data relates to an ambient temperature of +25C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts. DCL is measured at rated voltage after 5 minutes. For typical weight and composition see page 274. NOTE: AVX reserves the right to supply higher voltage ratings or tighter tolerance part in the same case size, to the same reliability standards. The Important Information/Disclaimer is incorporated in the catalog where these specifications came from or available online at www.avx.com/disclaimer/ by reference and should be reviewed in full before placing any order. 134 102720