W3A41C223KAT2A Kyocera AVX

Capacitor Array Capacitor Array (IPC) BENEFITS OF USING CAPACITOR ARRAYS AVX capacitor arrays offer designers the opportunity to For high volume users of cap arrays using the very latest lower placement costs, increase assembly line output placement equipment capable of placing 10 components per through lower component count per board and to reduce second, the increase in throughput can be very significant and real estate requirements. can have the overall effect of reducing the number of place- ment machines required to mount components: Reduced Costs Placement costs are greatly reduced by effectively placing If 120 million 2-element arrays or 40 million 4-element arrays one device instead of four or two. This results in increased were placed in a year, the requirement for placement throughput and translates into savings on machine time. equipment would be reduced by one machine. Inventory levels are lowered and further savings are made During a 20Hr operational day a machine places 720K on solder materials, etc. components. Over a working year of 167 days the machine Space Saving can place approximately 120 million. If 2-element arrays are Space savings can be quite dramatic when compared to mounted instead of discrete components, then the number the use of discrete chip capacitors. As an example, the of placements is reduced by a factor of two and in the 0508 4-element array offers a space reduction of >40% vs. scenario where 120 million 2-element arrays are placed there 4 x 0402 discrete capacitors and of >70% vs. 4 x 0603 is a saving of one pick and place machine. discrete capacitors. (This calculation is dependent on the Smaller volume users can also benefit from replacing spacing of the discrete components.) discrete components with arrays. The total number of place- ments is reduced thus creating spare capacity on placement Increased Throughput machines. This in turn generates the opportunity to increase Assuming that there are 220 passive components placed in a overall production output without further investment in new mobile phone: equipment. A reduction in the passive count to 200 (by replacing discrete components with arrays) results in an increase in throughput of approximately 9%. A reduction of 40 placements increases throughput by 18%. W2A (0508) Capacitor Arrays 4 pcs 0402 Capacitors = 1 pc 0508 Array 1.88 1.4 1.0 (0.074) (0.055) (0.039) 5.0 (0.197) 2.1 (0.083) 2 2 2 2 AREA = 7.0mm (0.276 in ) AREA = 3.95mm (0.156 in ) The 0508 4-element capacitor array gives a PCB space saving of over 40% vs four 0402 discretes and over 70% vs four 0603 discrete capacitors. W3A (0612) Capacitor Arrays 4 pcs 0603 Capacitors = 1 pc 0612 Array 1.60 2.3 1.5 (0.063) (0.091) (0.059) 6.0 (0.236) 3.2 (0.126) 2 2 2 2 AREA = 13.8mm (0.543 in ) AREA = 6.4mm (0.252 in ) The 0612 4-element capacitor array gives a PCB space saving of over 50% vs four 0603 discretes and over 70% vs four 0805 discrete capacitors. 032417 73Capacitor Array Capacitor Array (IPC) GENERAL DESCRIPTION AVX is the market leader in the development and manufacture of capacitor arrays. The array family of products also includes the 0612 4-element device as well as 0508 2-element and 4-element series, all of which have received widespread acceptance in the marketplace. 0508 - 2 Element AVX capacitor arrays are available in X5R, X7R and NP0 (C0G) ceramic dielectrics to cover a broad range of capacitance values. Voltage ratings from 6.3 Volts up to 100 Volts are offered. AVX also now offers a range of automotive capacitor arrays qualified to AEC-Q200 (see separate table). Key markets for capacitor arrays are Mobile and Cordless Phones, Digital Set Top Boxes, Computer Motherboards and Peripherals 0508 - 4 Element 0612 - 4 Element as well as Automotive applications, RF Modems, Networking Products, etc. AVX Capacitor Array - W2A41A***K S21 Magnitude 0 -5 -10 -15 -20 5pF 10pF -25 15pF 22pF -30 33pF 39pF 68pF -35 -40 0.01 0.1 1 10 Frequency (GHz) HOW TO ORDER W 2 A 4 3 C 103 M 2A A T Style Case Array Number Voltage Dielectric Capacitance Capacitance Packaging & Failure Termination Size of Caps Code Tolerance Quantity W = RoHS 6 = 6V A = NP0 Rate Code 2 = 2 Element *T = Plated Ni Code 2 = 0508 2 Sig Digits + J = 5% L = SnPb Z = 10V C = X7R A = Commercial 4 = 4 Element and Sn 2A = 7 Reel 3 = 0612 Number of K = 10% Y = 16V D = X5R 4 = Automotive *Z = FLEXITERM (4000) Zeros M = 20% 3 = 25V *B = 5% min lead 4A = 13 Reel 5 = 50V *X = FLEXITERM (10000) 1 = 100V with 5% min 2F = 7 Reel lead (1000) *RoHS Compliant *Not RoHS Compliant NOTE: Contact factory for availability of Termination and Tolerance Options for Specific Part Numbers. 032417 74 S21 mag. (dB)