KEW2500 Kyoritsu

DC MILLIAMP CLAMP METER KEW 2500 Measures DC4-20mA signals without breaking the loop Actual Size 0.01mA resolution for DC current Dual display with backlight shows both mA measurement and percent of 4-20 mA span Top class measurement 0.2% accuracy Spotlight for illuminating measurement point 6mm clamp jaw easy to use in tight places Analog output terminal for recorder connection Measurement from 0.01mA to 120.0mA Complies with IEC61010-1 CAT.300V KEW 2500 Specications Applicable to signal measurement DC A 20/100mA(Auto ranging) on process and building instrumentation 0.2%rdg 5dgt(0.00mA 21.49mA) 1.0%rdg 5dgt(21.0mA 120.0mA) Conductor size 6mm max. Analog output Recorder: DC1000mV against DC100mA Withstand voltage 2210V AC for 5 seconds Applicable standards IEC 61010-1, 61010-2-030 CAT. 300V IEC 61010-2-032 IEC 61326-1, 61326-2-2 IEC 60529 IP40 Operating temperature & humidity -10 +50 < 85% Storage temperature & humidity -20 +60 < 85% Power source R6/LR6(AA) (1.5V) 4 Dimensions 111(L) 61(W) 40(D)mm : Display unit 104(L) 34(W) 20(D)mm : Sensor 700mm : Sensor cable Weight Approx. 290g (including batteries) Spotlight LED & Backlight Display Accessories 9096(Carrying case) LR6(AA) 4 Instruction manual, Calibration certicate Optional 7256(Output cord) Applications Measures DC mA signals used in industrial automation equipment, PLC, transmitters, process control and analog I/0 systems without breaking the loop. Kew 2500 is ideal for measuring the level of 4-20 mA signals correlating process indi- cation with real physical value. Very useful to maintain and troubleshoot process and automation equipment without breaking the loop and stopping the process. Analog output terminal for recorder connection Digital Multimeter Diameter of measurable Fluorescent buttons to increase conductor : 6mm max operating in low light conditions DC10mV/DC1mA 6mm Recorder or Logger MODEL7256 Output cord(Optional) Note: The Auto-power OFF can be disabled for long recording Dual display gives simultaneous readout of % values and measured values(mA) Included Accessories Optional Accessory MODEL 7256 Output cord measured values (mA) % values Please read theSafety Warning in the instruction manual supplied with the instrument thoroughly and completely for correct use. Failure to follow the safety rules can cause re, trouble, electrical shock, etc. Therefore, make sure Safety Warnings : to operate the instrument on a correct power supply and voltage rating marked on each instrument. For inquires or orders : In consideration of the environment, soy ink and recycled paper were used in this publication. The contents of this leaet are subject to change without notice. KEW 2500-1E Mar. 12 AD