ECCOSHIELD VY ECCOSHIELD VY General Purpose RF Conductive Caulking Compound and Sealer Material Characteristics Typical Properties ECCOSHIELD VY is a single-component, electrically Service Temperature, F (C) -40 to 550 conductive, non-hardening compound of metallic (-40 to 288) particles Density 4.9 g/cc When properly applied, ECCOSHIELD VY will exhibit a dramatic improvement in virtually any RFI situation. It Volume Resistivity 0.001 ohm-cm assures long-term integrity of the shielding enclosure and will prevent corrosion in the contact area Typical Insertion Loss at Caulked Joint >100 dB ECCOSHIELD VY is effective over the entire useful Length of 1/8 (0.32 cm) dia. bead/lb 50 ft. (15 m) radio and microwave frequency range for magnetic fields, electric fields, and plane waves Shelf Life 6 months Due to high tack and non-hardening characteristics, ECCOSHIELD VY will function under vibration and displacement due to temperature changes Instructions for Use ECCOSHIELD VY is fast and economical to use For best results, the material should be applied at room temperature (minimum 68F, 20C). ECCOSHIELD VY can be used with conventional caulking equipment to develop fast and uniform- Applications weight beads. ECCOSHIELD VY can also be applied ECCOSHIELD VY is specifically designed for use on radio frequency shielded structures, cabinets, conduits, by spatula, putty knife, plastic syringe applicators, or other suitable tools such as caulking guns. For seams, threads, and other components to ensure spatula application, small amount of methyl ethyl containment or exclusion of RF energy ketone (MEK) can be added to adjust consistency Sealing the seams of equipment cabinets by forcing All surfaces for application should be prepared by ECCOSHIELD VY into the seams. Vibration or removing rust, scale, non-conductive oxides and dirt. handling will not affect the material since it remains in Wire brushing and/or solvent cleaning is usually a plastic state adequate. Surfaces should be bright and electrically Corrugated sheet metal buildings are made tight conductive (RF and weather seal) by caulking with ECCOSHIELD VY Apply ECCOSHIELD VY to the prepared surface using a syringe, caulking gun, or spatula. Lap joints may Removable cover plates are readily gasketed by an be made immediately. Excess and spillage may be application of ECCOSHIELD VY prior to bolting. They collected and reused can easily be removed from time to time since Hardened or thick material can be reactivated by the ECCOSHIELD VY does not harden addition of small amounts of methyl ketone Conduit threaded joints are made RF tight by the For cleanup, acetone or trichloroethylene are suitable application of a small amount of ECCOSHIELD VY to Caution: ECCOSHIELD VY contains flammable the threads prior to tightening. The conduit fittings solvents. Keep away from heat and open flames. can be unthreaded easily When not in use, keep sealed to avoid evaporation. The handling of these products should present no problems if ordinary care is exercised to avoid Shipping & Availability breathing vapors, the skin is protected against ECCOSHIELD VY is sold by the pound and packaged contamination, swallowing is avoided, and eyes are in small (4 oz.) glass jars protected ECCOSHIELD VY ships as a hazardous material: Class 3 Flammable, UN1866, PG II Upon special request ECCOSHIELD VY can be supplied in a small plastic syringe for extruding small diameter beads EMERSON & CUMING MICROWAVE PRODUCTS, INC., 28 York Avenue, Randolph, MA 02368 / Telephone (781) 961-9600. Use of Information and Material: Values shown are based on testing of laboratory test specimens and represent data that falls within normal range of the material. These values are not intended for use in establishing maximum, minimum or ranges of values for specification purposes. Any determination of the suitability of the material for any purpose contemplated by the user and the manner of such use is the responsibility of the user. The user should determine that the material meets the needs of the user s product and use. We hope that the information given here will be helpful. It is based on data and knowledge considered to be true and accurate and is offered for the user s consideration, investigation and verification but we do not warrant the results to be obtained. Please read all statements, recommendations or suggestions in conjunction with our conditions of sale INCLUDING THOSE LIMITING WARRANTIES AND REMEDIES, which apply to all goods supplied by us. We assume no responsibility for the use of these statements, recommendations or suggestions nor do we intend them as a recommendation for any use, which would infringe any patent or copyright. Emerson & Cuming Microwave Products Inc. Revision: 5/11/07 www.eccosorb.com S1 X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Chemicals category: Click to view products by Laird Connectivity manufacturer: Other Similar products are found below : DP-605NS 3045-QT 3125-9S 3748-Q-58 x8 FO-25DT S1009-KIT-A-CS8606 DP100-200ML 1743-2FP 152-KA-NC 826-450G 9729 9223 9945 7000000275 1601 8330-19G 842AR-15ML 841AR-150ML 842AR-P 843WB-15ML 8462-85ML 4354-1L 838AR-P 838AR- 15ML 419D-P-BK 419D-P-WH 8MT-450 8MT-25 832HD-25ML 832FX-450ML 834ATH-375ML 832HD-400ML 8617-1P 843AR-340G 843ER-800ML 9310-300ML 847-1P 419D-55ML 8800-375ML 8810-375ML 8820-2.55L 419E-340G 842UR-12ML 419D-1L CW3300WHITE CW2205 10447 9620-945ML 4140A-945ML FW2170