IAP Embedded MedicalMedical DeDevvice Sice Serervverer IAP Device Server THE MOST FLEXIBLE NETWORK CONNECTIVITY SOLUTION FOR INDUSTRIAL AND AUTOMATION APPLICATIONS Designed for robust operation and with support of Modbus, the chip-sized xPico IAP module provides simplicity and flexibility making it the easiest and fastest industrial network-enabling module on the market. xPico IAP is an extremely compact networking solution that enables Ethernet connectivity on virtually any device 24mm with a serial interface. The included industry-proven xPico IAP Actual Size Lantronix device server application with full IP stack and 16.5mm Modbus Protocol support allows seamless remote access to device data, simplifying design integration while providing robust connectivity. xPico IAP Highlights: Chip-sized Footprint: 24mm x 16.5mm As the smallest embedded device server in the world, xPico Complete Device Server Application with Full IP Stack IAP can be utilized in designs typically intended for chip Modbus TCP, ASCII, RTU Support solutions. A key difference with the xPico IAP is that there is Serial Port Supporting Up to 115.2kbps virtually no need to write a single line of code, translating to Extended Temperature: -40 to +85 C a much lower development cost and faster time-to-market. Features and Specifications Serial Interface > Two Serial CMOS Ports* (3.3V, 5V tolerant) 300 to 115.2 kbps for Modbus enabled ser ial por t Control signals: DTR/DCD, RTS/CTS (Por t 1 only) Flow control XON/XOFF Prog rammable I/O: 8 PIO pins (soft ware selectable) Lantronix Modbus Application Modbus TCP, Modbus AS CII, Modbus RTU. Master and Slave mode support * Modbus can only be operated on one serial port at a time. Network Interface > Inter face: Ethernet 10Base-T or 100Base-TX (Auto- sensing) Network Protocols > TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP, DNS, SNMPv1, TFTP, Modbus TCP, ASCII, RTU Management and Control > SNMP, Telnet, Serial Field upg radable firmware Architecture > Based on the DSTni-EX Enhanced 16-bit x86 Architecture Memor y: 256KB SRAM, 512KB Flash Available Software > MS Windows based Dev iceInstaller MS Windows based Com Por t Redirector Power > Input Voltage: 3.3VDC Physical Interface > 40-pin Board-to-Board SMT Connector Environmental > Operating Temperature: 40 to +85 C Storage Temperature : 40 to +85 C Relative Humidity: 0% to 90% non-condensing Ordering Information Packaging > Dimensions: 24mm (L) x 16.5mm (W) x 5.64mm (H) United States Europe Weight: 2.5g Call: 800.422.7055 Call: +31 (0) 76.52.3.6.74 4 Email: sales lantronix.com Email: EMEA lantronix.com Warranty > Buy Online: