Industrial Device Servers XPress DR / XPress DR-IAP REMOTELY CONFIGURE, PROGRAM, MONITOR, AND MANAGE: Connect PLCs, drives, process controls, power monitoring equipment, barcode scanners, and other factory floor serial devices. XPress DR / XPress DR-IAP Highlights The XPress DR and XPress DR-IAP Device Servers enable virtually any industrial device with serial capability to be connected to a new or existing Ethernet network. By encapsulating serial data and Connect enterprise (ERP, MES) systems transporting it over Ethernet, the XPress DR/DR-IAP establishes virtual serial links over Ethernet. By using to factory floor devices without disturbing existing control networks these units, limited-distance, point-to-point, direct serial connections can now be extended within the plant, throughout the facility, or across the global enterprise. Allow remote firmware upgrades, saving money and time from manual upgrades When used in conjunction with an OPC server, most Windows based HMI, SCADA, and PC-based control XPress DR-IAP version supports applications have full access to information in the connected device. Existing COM-port based Windows industrial communication protocols applications can access network-enabled devices using Lantronix Com Port Redirector software. Com Port Configurable serial interface supports Redirector allows the creation of virtual serial ports, which can be mapped to remote device servers over RS-232, RS-422, or RS-485 Ethernet and connected to the XPress DR and XPress DR-IAP. 10Base-T/100Base-TX Ethernet (RJ45) The XPress DR-IAP installable communication drivers allow specific support for various industrial Isolated serial and Ethernet ports communication protocols. With native support for these protocols, devices that previously allowed only one UL-approved for hazardous locations connection can now support multiple connections simultaneously. Class I, Divsion 2 Flexible configuration options allow the unit to be set up locally using the serial port, or remotely over RoHS compliant Ethernet using Telnet or a common web browser. DeviceInstaller a Windows, based configuration software, simplifies installation and configuration, enables access to the Web Manager and Telnet communications, and ping attached devices over the network. Flash memory provides for maintenance- free, non-volatile storage, and allows future system upgrades. Packaged in a rugged DIN-rail mount case and featuring 2000V galvanic isolation, 1500V Ethernet isolation, a wide 0 to 60C operating range, and a 9-30VDC/9-24VAC power input, the XPress DR and XPress DR-IAP are ideal for virtually any industrial application.Industrial Device XPress DR / XPress DR-IAP Servers Master/Slave Application RS-232/ 485 Personal Computer (PC) without Ethernet adapter DIN Rail Master/Slave Application Mount RS-232/ 485 Variable Speed Drive RS-232/ Personal Computer (PC) without 485 35 mm Ethernet adapter (1.4 in) DIN Rail Mount Variable Speed Drive RS-232/ Programmable Logic Controller 35 mm 485 (PLC) (1.4 in) RS-232/ Personal Computer (PC) with 485 installed Ethernet adapter Programmable Logic Controller Features and Specifications (PLC) Serial Interface RS-232/ Variable Speed Drive Interface: RS-232, RS-422, or RS-485 Personal Computer (PC) with 485 RS-232/ Connector: Screw terminals or RJ45 485 installed Ethernet adapter Data Rates: 300 to 115,200 bps Characters: 7 or 8 data bits Parity: odd, even, none Programmable Logic Controller Variable Speed Drive Stop Bits: 1 or 2 (PLC) RS-232/ Flow Control: 485 Software: XON/XOFF RS-232 or RS-422/485 Note: Serial connections may be Hardware: RTS/CTS attached to either the terminal block Installable Serial Protocols (XPress DR-IAP only) or to the RJ45 connector but not both simultaneously. Programmable Logic Controller Network Interface (PLC) Standards: ARP, UDP/IP, TCP/IP, ICMP, SNMP, BOOTP, RS-232 or RS-422/485 DHCP, TFTP, Telnet, and HTTP Note:10Base-T/ Serial connections 100Base-TX may Ethernetbe RS-232 or RS-422/485 Interface: 10Base-T/100Base-TX Ethernet attached to either the terminal block Connector: RJ45 or to the RJ45 connector but not Installable Application Layer Protocols (XPress DR-IAP only) both simultaneously. 9-30 VDC/9-24 VAC Indicators RS-232 or RS-422/485 Ready, Fault/Configuration, Activity, Link, Serial Transmit Data, Serial Receive Data 10Base-T/100Base-TX Ethernet Management SNMP, serial, Telnet, and HTTP (web browser) Part Number Description Isolation XPress DR Industrial Device Server, DIN Rail Mount, Ethernet: 9-30 VDC/9-24 VAC Serial Interface (RS-232/RS-422/RS-485 - terminal block -1500 Vrms from Serial Port XSDRSN-03 or RJ45), 10Base-T/100Base-TX, 9-30VDC/ 9-24VAC, -2000 Vrms from Power Input Port RoHS Serial: 2000 Vrms from Power Input Port Power XPress DR-IAP Industrial Device Server with Installable Input: 9 to 30VDC/9-24VAC, 3W maximum Industrial Protocols, DIN Rail Mount, Serial Interface XSDRIN-03 Connector: Screw terminals for power and ground (RS-232/RS-422/RS-485 - terminal block or RJ45), 10Base-T/100Base-TX, 9-30VDC/9-24VAC, RoHS Environmental (Operating) Temperature: 0 to 60C (32 to 140F) Humidity: 20% to 90% RH, non-condensing Ordering Information Packaging Mounting: DIN-rail (35 mm) Material: High-impact plastic Americas China Dimensions: 60 x 36 x 90 mm (2.4 x 1.4 x 3.54 in) Call: 800.422.7055 Call: +86.021.6237.8868 Agency Approvals sales lantronix.com Shanghai lantronix.com UL, CSA, CE, RCM, VCCI Buy Online: Warranty