RoHS Compliant Data Sheet June 2, 2014 FLT007A0Z/FLT007A0-SRZ Input Filter Modules 75Vdc Input Voltage Maximum 7A Output Current Maximum Features Compliant to RoHS EU Directive 2011/65/EU (Z versions) Compatible in a Pb-free or SnPb reflow environment (Z versions) Surface Mount and Through hole versions Common-mode and Differential-mode filtering Small size and low profile 25.4 mm x 25.4 mm x 12.2 mm (1 x 1 x 0.48 in) Same footprint as FLTR75V5 module Cost efficient open frame design Applications Wide operating temperature range (-40C to +85C) Distributed power architectures Meets the voltage isolation requirements for Intermediate bus voltage applications ETSI 300-132-2 and complies with and is licensed for Basic Insulation rating per EN60950-1 Telecommunications equipment UL* 60950-1 Recognized, CSA C22.2 No. 60950-1- Wireless Base stations 03 Certified, and VDE 0805:2001-12 (EN60950-1) Licensed Enterprise Networks CE mark meets 73/23/EEC and 93/68/EEC Industrial equipment directives Options ISO** 9001 and ISO 14001 certified manufacturing facilities Surface Mount Interconnect (-SR) Description The FLT007A0Z,FLT007A0-SRZ filter module is designed to operate over an input voltage range up to 75Vdc at output currents up to 7A in an ambient temperature of -40C to 85C. The filter module is optimized for use with dc/dc converter modules, to significantly reduce the conducted differential and common-mode noise returned to the power source. This filter module enables designers to meet the requirements of EMI standards CISPR 22 (EN55022) and FCC Class B by insertion in-line between the power source and the dc/dc converter module. These modules are designed and manufactured to be either surface mounted (-SR version) or through hole mounted on PCBs. * UL is a registered trademark of Underwriters Laboratories, Inc. CSA is a registered trademark of Canadian Standards Association. VDE is a trademark of Verband Deutscher Elektrotechniker e.V. ** ISO is a registered trademark of the International Organization of Standards Document No:DS05-028 ver 1.27 PDF name: FLT007A0Z.pdf Data Sheet FLT007A0Z/FLT007A0-SRZ Input Filter Modules June 2, 2014 75Vdc Input Voltage Maximum, 7A Output Current Maximum Absolute Maximum Ratings Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the device reliability. Parameter Device Symbol Min Max Unit Input Voltage Continuous All V 0 100 Vdc IN Operating Ambient Temperature All T -40 85 C A (see Thermal Considerations section) Storage Temperature All T -55 125 C stg I/O to Ground Isolation (100% Factory Tested) All 1500 Vdc Electrical Specifications Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. Parameter Device Symbol Min Typ Max Unit Operating Input Voltage All V 0 24/48 75 Vdc IN Maximum Input-to-Output Current (V = 0 to V ) All I 7 Adc IN iN,max max Resistance per leg All R 25 m CAUTION: This power module is not internally fused. An input line fuse must always be used. This power module can be used in a wide variety of applications, ranging from simple standalone operation to an integrated part of sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included, however, to achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-acting fuse with a maximum rating of 10 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturers data sheet for further information. LINEAGE POWER 2