MDEV-GPS-RM Linx Technologies

GPS / GNSS Receiver Master Development System User s Guide Warning: Some customers may want Linx radio frequency (RF) Table of Contents products to control machinery or devices remotely, including machinery or devices that can cause death, bodily injuries, and/or property 1 Introduction damage if improperly or inadvertently triggered, particularly in industrial settings or other applications implicating life-safety concerns (Life and 2 Ordering Information Property Safety Situations). 3 Receiver Development Board 3 Board Objects NO OEM LINX REMOTE CONTROL OR FUNCTION MODULE SHOULD EVER BE USED IN LIFE AND PROPERTY SAFETY 4 Initial Setup SITUATIONS. No OEM Linx Remote Control or Function Module 4 Troubleshooting should be modified for Life and Property Safety Situations. Such modification cannot provide sufficient safety and will void the products 5 The Prototyping Area regulatory certification and warranty. 6 The Receiver Section Customers may use our (non-Function) Modules, Antenna and 7 The USB Section Connectors as part of other systems in Life Safety Situations, but 8 The Display Section only with necessary and industry appropriate redundancies and 9 Master Development Software in compliance with applicable safety standards, including without limitation, ANSI and NFPA standards. It is solely the responsibility 10 Schematics of any Linx customer who uses one or more of these products to incorporate appropriate redundancies and safety standards for the Life and Property Safety Situation application. Do not use this or any Linx product to trigger an action directly from the data line or RSSI lines without a protocol or encoder/ decoder to validate the data. Without validation, any signal from another unrelated transmitter in the environment received by the module could inadvertently trigger the action. All RF products are susceptible to RF interference that can prevent communication. RF products without frequency agility or hopping implemented are more subject to interference. This module does not have a frequency hopping protocol built in. Do not use any Linx product over the limits in this data guide. Excessive voltage or extended operation at the maximum voltage could cause product failure. Exceeding the reflow temperature profile could cause product failure which is not immediately evident. Do not make any physical or electrical modifications to any Linx product. This will void the warranty and regulatory and UL certifications and may cause product failure which is not immediately evident.