0440004.WR Littelfuse

Fuse Datasheet 440 Series 2 1206 High I t Fuse RoHS Pb Description The 440 Series is a 100% RoHS Compliant, lead-free and halogen- free fuse series designed specifically to provide over-current protection to circuits that operate under high working ambient temperatures up to 150C and high inrush currents. The general design ensures excellent temperature stability and performance reliability. This high I2t fuse series is designed to have ultra high inrush current withstand capability to avoid nuisance fuse open. Features and Benefits Operating Temperature from Ultra high I2t values -55C to +150C Recognized to UL/CSA/NMX RoHS compliant, lead-free and 248-1 and UL/CSA/NMX 248-14 halogen-free Suitable for both leaded and lead-free reflow / wave soldering Additional Information Applications LCD Displays Scanners Servers Dat a Modems Notebook Computers Hard Disk Driv es Resources Accessories Samples Printers Electrical Characteristics for Series Agency Approvals % of Ampere Rating Ampere Rating Opening Time at 25C Agency Agency File Number Ampere Range 100% 0.25A - 8A 4 hours, Minimum E10480 0.25A - 8A 350% 0.25A - 8A 5 secs., Maximum 29862 0.25A - 8A Electrical Specifications by Item Ampere Nominal Nominal Nominal Voltage Nominal Power Agency Approvals Amp Max. Voltage Interrupting Rating 2 Rating Resistance Melting I t Drop At Rated Dissipation At Rated 1 Code Rating (V) (AC/DC) 2 2 3 4 (A) (Ohms) (A Sec.) Current (V) Current (W) 0.250 .250 125 2.140 0.00649 0.5260 0.132 X X 50 A 125 V AC/DC 0.375 .375 125 1.216 0.01455 0.4993 0.187 X X 0.500 .500 63 50 A 63 V AC/DC 0.8140 0.02642 0.4831 0.242 X X 0.750 .750 63 50 A 63 V AC/DC 0.4624 0.09312 0.3983 0.299 X X 1.00 001. 50 0.3096 0.21054 0.3457 0.346 X X 50 A 50 V DC 1.25 1.25 50 0.2265 0.379 0.3240 0.405 X X 50 A 50 V AC 1.50 01.5 50 0.1759 0.50652 0.3215 0.482 X X 1.75 1.75 32 0.0450 0.3312 0.0777 0.136 X X 2.00 002. 32 0.0385 0.4326 0.0792 0.158 X X 2.50 02.5 32 0.02850 0.8191 0.0747 0.187 X X 3.00 003. 32 0.02252 1.232 0.0742 0.223 X X 3.50 03.5 32 50 A 32 V AC/DC 0.01845 1.789 0.0757 0.265 X X 4.00 004. 32 0.01553 2.601 0.0709 0.284 X X 5.00 005. 32 0.0120 4.761 0.0654 0.327 X X 7.00 007. 32 0.00753 8.464 0.0696 0.487 X X 8.00 008. 32 0.00634 12.95 0.0655 0.524 X X Notes: 1. AC Interrupting Rating tested at rated voltage with unity power factor. DC Interrupting Rating tested at rated Devices designed to carry rated current for 4 hours minimum. It is recommended that devices be operated voltage with time constant < 0.8 msec. continuously at no more than 80% rated current. See Temperature Derating Curvefor additional derating information. 2. Nominal Resistance measured with < 10% rated current. Devices designed to be mounted with marking code facing up. 3. Contact Littelfuse if application transient surges are less than 1 ms. 4. Nominal Voltage Drop measured at rated current after temperature has stabilized. 2020 Littelfuse, Inc. 1 Specifications are subject to change without notice. Revised: GD. 12/16/20Fuse Datasheet 440 Series 2 1206 High I t Fuse Temperature Rerating Curve Average Time Current Curves 140 100 120 100 10 80 60 1 40 -65 -45 -25 -5 15 35 55 75 95 115 135 155 TEMPERATURE (C) 0.1 Note: 1. Rerating depicted in this curve is in addition to the standard derating of 20% for continuous operation. Example: For continuous operation at 75 degrees celsius, the fuse should be derated as follows: I = (0.80)(0.85)I = (0.68)I n n 0.01 0.001 0.1 1.0 10.0 100.0 1000. CURRENT IN AMPERES Soldering Parameters Reflow Condition Pb-free assembly t P T P - Temperature Min (T ) 150C s(min) Critical Zone Ramp-up T to T L P Pre Heat - Temperature Max (T ) 200C s(max) T L - Time (Min to Max) (t ) 60 180 seconds s t L T Average Ramp-Up Rate (Liquidus Temp (T ) to S(max) L 3C/second max. peak) Ramp-down T to T - Ramp-up Rate 5C/second max. S(max) L T S(min) - Temperature (T ) (Liquidus) 217C L Reflow t S - Temperature (t ) 60 150 seconds L Preheat +0/-5 Peak Temperature (T ) 260 C P 25C Time within 5C of actual peak Temperature (t ) t 25C to Peak 10 30 seconds p Ramp-down Rate 6C/second max. Time (t) Time 25C to peak Temperature (T ) 8 minutes max. P Do not exceed 260C Wave Soldering 260C, 10 seconds max. 2020 Littelfuse, Inc. 2 Specifications are subject to change without notice. Revised: GD. 12/16/20 PERCENT OF RATING TIME IN SECONDS Temperature (T)