Rev. 1-A-012315 Page 7 AC700-CUA Firmware Upgrade Module 5. WARRANTY 3714 Kinnear Place Saskatoon, SK Canada S7P 0A6 Ph: (306) 373-5505 Fx: (306) 374-2245 www.littelfuse.com/relayscontrols The AC700-CUA Communications & Firmware Upgrade Modules are warranted to be free from defects in material and workmanship for a period of five years from the date of purchase. Littelfuse Startco will (at Littelfuse Startcos option) repair, replace, or refund the original AC700-CUA MANUAL purchase price of an AC700-CUA that is determined by Littelfuse Startco to be defective if it is returned to the factory, freight prepaid, within the warranty period. This warranty does not apply to repairs required as a result of misuse, negligence, an accident, improper installation, COMMUNICATIONS & FIRMWARE UPGRADE MODULES tampering, or insufficient care. Littelfuse Startco does not warrant products repaired or modified by non-Littelfuse Startco personnel. REVISION 1-A-012315 APPENDIX A AC700-CUA REVISION HISTORY MANUAL RELEASE MANUAL DATE REVISION January 23, 2015 1-A-012315 MANUAL REVISION HISTORY REVISION 1-A-012315 SECTION 2 Updated installation instructions. SECTION 4 Ordering information updated. APPENDIX A Revision history added. Copyright 2015 by Littelfuse Startco All rights reserved. Document Number: PM-1008-EN Printed in Canada. Rev. 1-A-012315 Page 1 Rev. 1-A-012315 Page 6 AC700-CUA Firmware Upgrade Module AC700-CUA Firmware Upgrade Module TABLE OF CONTENTS FASTENING REMOVAL SECTION PAGE 1 Introduction ........................................................................................................ 1 NOTE 1 1.1 General .......................................................................................................................... 1 1.1.1 Firmware Upgrade Module ............................................................................. 1 1.1.2 Communications Modules .............................................................................. 2 1.2 AC700-CUA Features................................................................................................... 2 NOTE 1 1.2.1 Firmware Upgrade Module ............................................................................. 2 1.2.2 Communications Modules .............................................................................. 2 2 Installation.................................................................................................................... 2 2.1 Firmware Upgrade Module Installation ....................................................................... 2 2.2 Communications Module Installation .......................................................................... 4 3 Technical Specifications ............................................................................................. 4 NOTES: 1. THE RECOMMENDED TERMINAL TIGHTENING TORQUE IS 0.25 nM. 3.1 Firmware Upgrade Module .......................................................................................... 4 2. WHEN FASTENING THE MODULE IN THE END PRODUCT, MAKE SURE THAT THE ANYBUS MODULE IS PROPERLY 3.2 Communications Module.............................................................................................. 4 ALIGNED IN TO THE COMPACTFLASH SOCKET PRIOR TO APPLYING ANY FORCE. ROUGH HANDLING AND/OR EXCESSIVE FORCE IN COMBINATIN WITH MISALIGNMENT MAY CAUSE MECHANICAL DAMAGE TO THE 4 Ordering Information................................................................................................. 6 ANYBUS-COMPACTCOM MODULE AND/OR THE END PRODUCT. 5 Warranty ...................................................................................................................... 7 FIGURE 5. Anybus Communications Module Installation. Appendix A AC700-CUA Revision History .......................................................................... 7 Shipping Weight ............................ 0.1 kg (0.3 lb) LIST OF FIGURES FIGURE PAGE Environment: 1 Firmware Upgrade Module (AC700-CUA-00) Outline .............................................. 3 Operating Temperature ............... -40 to 60C (-40 to 140F) 2 Communications Module (AC700-CUA-03) Outline ................................................. 3 Storage Temperature ................... -40 to 85C (-67 to 160F) 3 Firmware Upgrade Module (AC700-CUA-00) installed in an EL731 ....................... 5 Humidity ..................................... 85% Non-Condensing 4 Ethernet/IP Communications Module (AC700-CUA-03) installed in an EL731 ....... 5 Shock and Vibration: 5 Anybus Communications Module Installation ............................................................ 6 Shock Test .................................... Operating IEC 68-2-27 half-sine 30 g, 11 ms, 3 positive and 3 negative shocks in each of three DISCLAIMER mutually-perpendicular directions. Shock Test .................................... Operating IEC 68-2-27 half-sine 50 g, 11 ms, Specifications are subject to change without notice. Littelfuse Startco is not liable for 3 positive and 3 negative shocks in each of three contingent or consequential damages, or for expenses sustained as a result of incorrect mutually-perpendicular directions. application, incorrect adjustment, or a malfunction. Sinusodial Test ............................. Operating IEC 68-2-6 10-500 Hz, 0.35 mm 5 g, 1 oct/min., 10 double sweep 1. INTRODUCTION in each of three mutually-perpendicular directions. 1.1 GENERAL 4. ORDERING INFORMATION AC700-CUA is the base model number for the firmware upgrade module and (1) Communications AC700-CUA-0 communication modules which can be installed in various products available from Upgrade Littelfuse. Adapter Adapter Type 1.1.1 FIRMWARE UPGRADE MODULE 0 Firmware Upgrade The AC700-CUA-00 is used to upgrade compatible-relay firmware and is field- Module 1 DeviceNet installable. Detailed instructions are included in the help files of the SE-Flash Firmware 2 Probus Upgrade Software. 3 EtherNet/IP Field upgrades allow for the addition of new or enhanced features and firmware 4 Modbus TCP maintenance. The field upgrade module provides isolation between the unit under NOTES: (1) service and the computer running SE-Flash. Communications adapters can be ordered separately to field upgrade EL731-X0-X0 models.