TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG Series RoHS GREEN Pb AQxxC-01FTG Series 450W Bidirectional TVS Diode Description The bidirectional AQxxC-01FTG Series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC applications. It will protect any sensitive equipment from damage due to electrostatic discharge (ESD) and other transient events. The AQxxC-01FTG series can safely absorb repetitive ESD strikes of 30 kV (contact and air discharge as defined in IEC 61000-4-2) without any performance degradation. Additionally, the AQ05C can safely conduct a 30A 8/20 surge event as defined in IEC 61000-4-5 2nd Edition. Pinout and Functional Block Diagram Features ESD, IEC 61000-4-2, PPAP capable 30kV contact, 30kV air Low leakage current EFT, IEC 61000-4-4, 40A Small SOD323 package 1 (5/50ns) ts 0805 ffi ootprints Lightning, 30A (8/20 as AEC-Q101 qualified defined in IEC 61000- Moisture Sensitivity 4-5 2nd edition) for the Level(MSL -1) AQ05C Halogen free, lead free Low clamping voltage and RoHS compliant 2 Applications Switches / Buttons Notebooks / Desktops / Servers Test Equipment / Instrumentation Computer Peripherals Point-of-Sale Terminals CAN Bus protection Medical Equipment Automotive applications Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 09/21/18 TVS Diode Array (SPA Diodes) General Purpose ESD Protection - AQxxC-01FTG Series Absolute Maximum Ratings Symbol Parameter Value Units P Peak Pulse Power (t =8/20s) 450 W pk p T Operating Temperature -40 to 150 C OP T Storage Temperature -55 to 150 C STOR Notes: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. AQ05C Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I =1A 5.0 V RWM R Breakdown Voltage V I =1mA 6.0 V BR R Reverse Leakage Current I V =5V 1.0 A LEAK R I =1A, t =8/20s, Fwd 10.0 V PP p 1 Clamp Voltage V C I =10A, t =8/20s, Fwd 14.5 V PP P 2 Dynamic Resistance R TLP, t =100ns, I/O to Ground 0.31 DYN p Peak Pulse Current I t =8/20s 30.0 A pp p IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 200 pF I/O-I/O AQ12C Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I =1A 12.0 V RWM R Breakdown Voltage V I =1mA 13.3 V BR R Reverse Leakage Current I V =12V 1.0 A LEAK R I =1A, t =8/20s, Fwd 18.5 V PP p 1 Clamp Voltage V C I =10A, t =8/20s, Fwd 23.0 V PP P 2 Dynamic Resistance R TLP, t =100ns, I/O to Ground 0.41 DYN p Peak Pulse Current I t =8/20s 17.0 A pp p IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 100 pF I/O-I/O 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 09/21/18