TVS Diode Arrays (SPA Diodes) General Purpose ESD Protection - AQHVxx-01LTG Series RoHS Pb GREEN AQHVxx-01LTG Series 250W Discrete Unidirectional TVS Diode Description The AQHVxx-01LTG series is designed to provide an option for very fast acting, high performance over-voltage protection components. This series is ideally suited for power interfaces, passenger charging interfaces, and well as LED lighting modules, and low speed I/Os. It will protect sensitive equipment from damage due to electrostatic discharge (ESD) and other overvoltage transients. It can safely absorb repetitive ESD strikes above the maximum level of the IEC 61000-4-2 international standard (Level 4, 8kV contact discharge) without performance degradation and safely conduct up to 10A (AQHV12) nd of induced surge current (IEC 61000-4-5 2 edition, t =8/20s) with very low clamping voltages. P Pinout Features ESD, IEC 61000-4-2, Low leakage current 30kV contact, 30kV air AEC-Q101 qualified 1 EFT, IEC 61000-4-4, 40A Moisture Sensitivity Level (MSL -1) (5/50ns) Halogen free, lead free Lightning, 10A (8/20s as and RoHS compliant defined in IEC 61000-4-5 nd 2 edition) for AQHV12 Low clamping voltage PPAP capable 2 Applications Functional Block Diagram LED Lighting Modules RS232 / RS485 1 Portable Instrumentation CAN and LIN Bus General Purpose I/O Automotive application 2 Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 07/08/19 TVS Diode Arrays (SPA Diodes) General Purpose ESD Protection - AQHVxx-01LTG Series Absolute Maximum Ratings Symbol Parameter Value Units P Peak Pulse Power (t =8/20s) 250 W pk p T Operating Temperature -40 to 150 C OP T Storage Temperature -55 to 150 C STOR Notes: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. AQHV12 Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I =1A 12.0 V RWM R Breakdown Voltage V I =1mA 13.3 14.3 V BR R Reverse Leakage Current I V =12V 5 50 nA LEAK R I =1A, t =8/20s, I/O to GND 16.5 20 V PP p 1 Clamp Voltage V C I =10A, t =8/20s, I/O to GND 23.5 26 V PP P 2 Dynamic Resistance R TLP, t =100ns, I/O to GND 0.22 DYN p Peak Pulse Current I t =8/20s 10.0 A pp p IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 55.5 60 pF I/O-GND AQHV15 Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I =1A 15 V RWM R Breakdown Voltage V I =1mA 16.7 18.7 V BR R Reverse Leakage Current I V =15V 5 50 nA LEAK R I =1A, t =8/20s, I/O to GND 21.5 25 V PP p 1 Clamp Voltage V C I =7A, t =8/20s, I/O to GND 30 35 V PP P 2 Dynamic Resistance R TLP, t =100ns, I/O to GND 0.25 DYN p Peak Pulse Current I t =8/20s 7.0 A pp p IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 43 46 pF I/O-GND AQHV24 Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I =1A 24 V RWM R Breakdown Voltage V I =1mA 26.7 28.7 V BR R Reverse Leakage Current I V =24V 5 50 nA LEAK R I =1A, t =8/20s, I/O to GND 33 38 V PP p 1 Clamp Voltage V C I =5A, t =8/20s, I/O to GND 46.5 52 V PP p 2 Dynamic Resistance R TLP, t =100ns, I/O to GND 0.35 DYN p Peak Pulse Current I t =8/20s 5 A pp p IEC 61000-4-2 (Contact Discharge) 25 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 30 32 pF I/O-GND 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 07/08/19