Transient Voltage Suppression Diodes Axial Leaded 400W > P4KE series RoHS Pb e3 P4KE Series Description Bi-directional The P4KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Uni-directional Features 400W peak pulse Typical I less than 1A R capability at 10/1000s when V min>12V BR waveform, repetition rate High temperature (duty cycles):0.01% to reflow soldering Glass passivated chip guaranteed: 260C/40sec Agency Approvals junction in DO-41 Package / 0.375,(9.5mm) lead length, 5 lbs., (2.3kg) AGENCY AGENCY FILE NUMBER Fast response time: tension typically less than 1.0ps E230531 from 0 Volts to BV min V T = V 25C BR J BR x (1+T x (T - 25)) Excellent clamping J (T:Temperature capability Maximum Ratings and Thermal Characteristics O Coefficient, typical value (T =25 C unless otherwise noted) Typical failure mode is A is 0.1%) short from over-specified Parameter Symbol Value Unit Plastic package is voltage or current ammabilitfl y rated V-0 per Peak Pulse Power Dissipation by Whisk er test is conducted 10/1000s Test Waveform (Fig.2) P 400 W Underwriters Laboratories PPM based on JEDEC (Note 1), (Note 4) Matte tin leadfree plated JESD201A per its table 4a Steady State Power Dissipation on P 1.5 W and 4c Halogen free and RoHS D Infinite Heat Sink at T =75C L compliant IEC-61000-4-2 ESD Peak Forward Surge Current, 8.3ms 30kV(Air), 30kV (Contact) Pb-free E3 means 2nd Single Half Sine Wave Unidirectional I 60 A FSM Only (Note 2) level interconnect is ESD protection of data Maximum Instantaneous Forward Pb-free and the terminal lines in accordance with Voltage at 25A for Unidirectional V 3.5/5.0 V F finish material is tin(Sn) IEC 61000-4-2 Only (Note 3) (IPC/JEDEC J-STD- EFT protection of data Operating Junction and Storage T , T -55 to 175 C 609A.01) J STG lines in accordance with Temperature Range IEC 61000-4-4 Typical Thermal Resistance Junction C/W R 60 JL Low incremental surge to Lead resistance Typical Thermal Resistance Junction C/W R 100 JA to Ambient Notes: Applications O 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25 C per Fig. 3. J 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per TVS devices are ideal for the protection of I/O interfaces, minute maximum. V bus and other vulnerable circuits used in telecom, 3. V < 3.5V for single die parts and V < 5.0V for stacked-die parts. CC F F computer, industrial and consumer electronic applications. 4. The P of stacked-die parts is 600W and please contact littelfuse for the detail PPM stacked-die parts. Functional Diagram Additional Infomarion Bi-directional Datasheet Samples Resources Cathode Anode Uni-directional 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15Transient Voltage Suppression Diodes Axial Leaded 400W > P4KE series Electrical Characteristics (T =25C unless otherwise noted) A Maximum Breakdown Test Reverse Maximum Maximum Agency Part Part Clamping Voltage Current Stand off Peak Reverse Approval Number Number Voltage V I (V) I Voltage V Pulse Current Leakage BR T T R (Uni) (Bi) V I C pp (Volts) I (A) I V (A) (mA) pp R R MIN MAX (V) P4KE6.8A P4KE6.8CA 5.80 6.45 7.14 10 10.5 39.00 1000 X P4KE7.5A P4KE7.5CA 6.40 7.13 7.88 10 11.3 36.30 500 X P4KE8.2A P4KE8.2CA 7.02 7.79 8.61 10 12.1 33.90 200 X P4KE9.1A P4KE9.1CA 7.78 8.65 9.55 1 13.4 30.60 50 X P4KE10A P4KE10CA 8.55 9.50 10.50 1 14.5 28.30 10 X P4KE11A P4KE11CA 9.40 10.50 11.60 1 15.6 26.30 5 X P4KE12A P4KE12CA 10.20 11.40 12.60 1 16.7 24.60 5 X P4KE13A P4KE13CA 11.10 12.40 13.70 1 18.2 22.50 1 X P4KE15A P4KE15CA 12.80 14.30 15.80 1 21.2 19.30 1 X P4KE16A P4KE16CA 13.60 15.20 16.80 1 22.5 18.20 1 X P4KE18A P4KE18CA 15.30 17.10 18.90 1 25.5 16.10 1 X P4KE20A P4KE20CA 17.10 19.00 21.00 1 27.7 14.80 1 X P4KE22A P4KE22CA 18.80 20.90 23.10 1 30.6 13.40 1 X P4KE24A P4KE24CA 20.50 22.80 25.20 1 33.2 12.30 1 X P4KE27A P4KE27CA 23.10 25.70 28.40 1 37.5 10.90 1 X P4KE30A P4KE30CA 25.60 28.50 31.50 1 41.4 9.90 1 X P4KE33A P4KE33CA 28.20 31.40 34.70 1 45.7 9.00 1 X P4KE36A P4KE36CA 30.80 34.20 37.80 1 49.9 8.20 1 X P4KE39A P4KE39CA 33.30 37.10 41.00 1 53.9 7.60 1 X P4KE43A P4KE43CA 36.80 40.90 45.20 1 59.3 6.90 1 X P4KE47A P4KE47CA 40.20 44.70 49.40 1 64.8 6.30 1 X P4KE51A P4KE51CA 43.60 48.50 53.60 1 70.1 5.80 1 X P4KE56A P4KE56CA 47.80 53.20 58.80 1 77.0 5.30 1 X P4KE62A P4KE62CA 53.00 58.90 65.10 1 85.0 4.80 1 X P4KE68A P4KE68CA 58.10 64.60 71.40 1 92.0 4.50 1 X P4KE75A P4KE75CA 64.10 71.30 78.80 1 103.0 4.00 1 X P4KE82A P4KE82CA 70.10 77.90 86.10 1 113.0 3.60 1 X P4KE91A P4KE91CA 77.80 86.50 95.50 1 125.0 3.30 1 X P4KE100A P4KE100CA 85.50 95.00 105.00 1 137.0 3.00 1 X P4KE110A P4KE110CA 94.00 105.00 116.00 1 152.0 2.70 1 X P4KE120A P4KE120CA 102.00 114.00 126.00 1 165.0 2.50 1 X P4KE130A P4KE130CA 111.00 124.00 137.00 1 179.0 2.30 1 X P4KE150A P4KE150CA 128.00 143.00 158.00 1 207.0 2.00 1 X P4KE160A P4KE160CA 136.00 152.00 168.00 1 219.0 1.90 1 X P4KE170A P4KE170CA 145.00 162.00 179.00 1 234.0 1.80 1 X P4KE180A P4KE180CA 154.00 171.00 189.00 1 246.0 1.70 1 X P4KE200A P4KE200CA 171.00 190.00 210.00 1 274.0 1.50 1 X P4KE220A P4KE220CA 185.00 209.00 231.00 1 328.0 1.30 1 P4KE250A P4KE250CA 214.00 237.00 263.00 1 344.0 1.20 1 P4KE300A P4KE300CA 256.00 285.00 315.00 1 414.0 1.00 1 P4KE350A P4KE350CA 300.00 332.00 368.00 1 482.0 0.85 1 P4KE400A P4KE400CA 342.00 380.00 420.00 1 548.0 0.75 1 P4KE440A P4KE440CA 376.00 418.00 462.00 1 602.0 0.68 1 P4KE480A P4KE480CA 408.00 456.00 504.00 1 658.0 0.61 1 P4KE510A P4KE510CA 434.00 485.00 535.00 1 698.0 0.57 1 P4KE530A P4KE530CA 451.00 503.50 556.50 1 725.0 0.55 1 P4KE540A P4KE540CA 460.00 513.00 567.00 1 740.0 0.54 1 P4KE550A P4KE550CA 468.00 522.50 577.50 1 760.0 0.52 1 For bidirectional type having V of 10 volts and less, the I limit is double. R R For parts without A , the V is 10% and V is 5% higher than with A parts BR C 2015 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 11/20/15