TVS Diode Axial Leaded 400W > P4KE series RoHS Pb e3 P4KE Series Description The P4KE Series is designed specifically to protect sensitive electronic equipment from EFTs, ESD, and Bi-directional induced lightning transients. Features Uni-directional 400W peak pulse Typical IR 1 A for VBR capability at 10/1000s min > 12.6 V waveform, repetition rate High temperature (duty cycles):0.01% reflow soldering Glass passivated chip guaranteed: 260C/40sec Agency Approvals junction in DO-41 Package / 0.375,(9.5mm) lead length, 5 lbs., (2.3kg) Fast response time: Agency Agency File Number tension typically less than 1.0ps E230531 from 0 Volts to V min V T = V 25C BR BR J BR x (1+T x (T - 25)) Excellent clamping J (T:Temperature capability Coefficient, typical value Typical failure mode is a is 0.1%) Maximum Ratings and Thermal Characteristics short circuit O (T =25 C unless otherwise noted) UL Recognized compound A Whisk er test is conducted meeting flammability per Table 4a/4c of JEDEC Parameter Symbol Value Unit rating V-0 JESD201A Halogen free and RoHS Peak Pulse Power Dissipation (Fig.2) by 10/1000s IEC 61 000-4-2 ESD P 400 W PPM Test Waveform (Fig.4) (Note 1), (Note 4) compliant 30kV(Air), 30kV (Contact) Steady State Power Dissipation on Infinite Heat Pb-free E3 means 2nd P 1.5 W D EFT protection of dat a Sink at T =75C L level interconnect is Pb- lines in accordance with Peak Forward Surge Current, 8.3ms Single Half I 60 A free and the terminal finish FSM Sine Wave Unidirectional Only (Note 2) IEC 61000-4-4 material is tin(Sn) (IPC/ Maximum Instantaneous Forward Voltage at 25A Low incremental surge V 3.5/5.0 V F JEDEC J-STD-609A.01) for Unidirectional Only (Note 3) resistance Operating Junction and Storage Temperature T , T -55 to 175 C J STG Range Typical Thermal Resistance Junction to Lead R 60 C/W JL Typical Thermal Resistance Junction to Ambient R 100 C/W JA Applications Notes: O 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25 C per Fig. 3. J TVS components are ideal for the protection of I/O 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. 3. V < 3.5V for single die parts and V < 5.0V for stacked-die parts. interfaces, V bus and other vulnerable circuits used F F CC 4. The P of stacked-die parts is 600W, please contact Littelfuse for the stacked-die component details. PPM in telecom, computer, industrial ICT equipment and consumer electronic applications. Functional Diagram Additional Infomarion Bi-directional Datasheet Samples Resources Cathode Anode Uni-directional 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/31/20TVS Diode Axial Leaded 400W > P4KE series Electrical Characteristics (T =25C unless otherwise noted) A Breakdown Test Agency Reverse Maximum Maximum Part Part Maximum Peak Voltage Approval Current Stand off Clamping Reverse Number Number Pulse Current I Voltage V V I (V) Voltage Leakage BR T T R (Uni) (Bi) I (A) pp (Volts) V I (V) I V (A) (mA) C pp R R Min. Max. P4KE6.8A P4KE6.8CA 5.80 6.45 7.14 10 10.5 39.00 1000 X P4KE7.5A P4KE7.5CA 6.40 7.13 7.88 10 11.3 36.30 500 X P4KE8.2A P4KE8.2CA 7.02 7.79 8.61 10 12.1 33.90 200 X P4KE9.1A P4KE9.1CA 7.78 8.65 9.55 1 13.4 30.60 50 X P4KE10A P4KE10CA 8.55 9.50 10.50 1 14.5 28.30 10 X P4KE11A P4KE11CA 9.40 10.50 11.60 1 15.6 26.30 5 X P4KE12A P4KE12CA 10.20 11.40 12.60 1 16.7 24.60 5 X P4KE13A P4KE13CA 11.10 12.40 13.70 1 18.2 22.50 1 X P4KE15A P4KE15CA 12.80 14.30 15.80 1 21.2 19.30 1 X P4KE16A P4KE16CA 13.60 15.20 16.80 1 22.5 18.20 1 X P4KE18A P4KE18CA 15.30 17.10 18.90 1 25.5 16.10 1 X P4KE20A P4KE20CA 17.10 19.00 21.00 1 27.7 14.80 1 X P4KE22A P4KE22CA 18.80 20.90 23.10 1 30.6 13.40 1 X P4KE24A P4KE24CA 20.50 22.80 25.20 1 33.2 12.30 1 X P4KE27A P4KE27CA 23.10 25.70 28.40 1 37.5 10.90 1 X P4KE30A P4KE30CA 25.60 28.50 31.50 1 41.4 9.90 1 X P4KE33A P4KE33CA 28.20 31.40 34.70 1 45.7 9.00 1 X P4KE36A P4KE36CA 30.80 34.20 37.80 1 49.9 8.20 1 X P4KE39A P4KE39CA 33.30 37.10 41.00 1 53.9 7.60 1 X P4KE43A P4KE43CA 36.80 40.90 45.20 1 59.3 6.90 1 X P4KE47A P4KE47CA 40.20 44.70 49.40 1 64.8 6.30 1 X P4KE51A P4KE51CA 43.60 48.50 53.60 1 70.1 5.80 1 X P4KE56A P4KE56CA 47.80 53.20 58.80 1 77.0 5.30 1 X P4KE62A P4KE62CA 53.00 58.90 65.10 1 85.0 4.80 1 X P4KE68A P4KE68CA 58.10 64.60 71.40 1 92.0 4.50 1 X P4KE75A P4KE75CA 64.10 71.30 78.80 1 103.0 4.00 1 X P4KE82A P4KE82CA 70.10 77.90 86.10 1 113.0 3.60 1 X P4KE91A P4KE91CA 77.80 86.50 95.50 1 125.0 3.30 1 X P4KE100A P4KE100CA 85.50 95.00 105.00 1 137.0 3.00 1 X P4KE110A - 94.00 105.00 116.00 1 152.0 2.70 1 X - P4KE110CA* 94.00 105.00 116.00 1 152.0 4.00 1 X P4KE120A - 102.00 114.00 126.00 1 165.0 2.50 1 X - P4KE120CA* 102.00 114.00 126.00 1 165.0 3.70 1 X P4KE130A - 111.00 124.00 137.00 1 179.0 2.30 1 X - P4KE130CA* 111.00 124.00 137.00 1 179.0 3.40 1 X P4KE150A - 128.00 143.00 158.00 1 207.0 2.00 1 X - P4KE150CA* 128.00 143.00 158.00 1 207.0 2.90 1 X P4KE160A - 136.00 152.00 168.00 1 219.0 1.90 1 X - P4KE160CA* 136.00 152.00 168.00 1 219.0 2.80 1 X P4KE170A - 145.00 162.00 179.00 1 234.0 1.80 1 X - P4KE170CA* 145.00 162.00 179.00 1 234.0 2.60 1 X P4KE180A - 154.00 171.00 189.00 1 246.0 1.70 1 X - P4KE180CA* 154.00 171.00 189.00 1 246.0 2.50 1 X P4KE200A - 171.00 190.00 210.00 1 274.0 1.50 1 X - P4KE200CA* 171.00 190.00 210.00 1 274.0 2.20 1 X P4KE220A - 185.00 209.00 231.00 1 328.0 1.30 1 - - P4KE220CA* 185.00 209.00 231.00 1 328.0 1.90 1 - P4KE250A - 214.00 237.00 263.00 1 344.0 1.20 1 - * - P4KE250CA 214.00 237.00 263.00 1 344.0 1.80 1 - P4KE300A - 256.00 285.00 315.00 1 414.0 1.00 1 - - P4KE300CA* 256.00 285.00 315.00 1 414.0 1.50 1 - P4KE350A* P4KE350CA* 300.00 332.00 368.00 1 482.0 1.30 1 - P4KE400A* P4KE400CA* 342.00 380.00 420.00 1 548.0 1.10 1 - P4KE440A* P4KE440CA* 376.00 418.00 462.00 1 602.0 1.00 1 - P4KE480A* P4KE480CA* 408.00 456.00 504.00 1 658.0 0.92 1 - P4KE510A* P4KE510CA* 434.00 485.00 535.00 1 698.0 0.86 1 - P4KE530A* P4KE530CA* 451.00 503.50 556.50 1 725.0 0.83 1 - P4KE540A* P4KE540CA* 460.00 513.00 567.00 1 740.0 0.82 1 - P4KE550A* P4KE550CA* 468.00 522.50 577.50 1 760.0 0.79 1 - For bidirectional type having V of 10 volts and less, the I value is double. R R For parts without A , the V is 10% and V is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred. BR C For stack-die parts, use * to label the part number. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/31/20