P6KE43A-B Littelfuse

TVS Diodes Axial Leaded 600W > P6KE series RoHS Pb e3 P6KE Series Description The P6KE Series is designed specifically to protect Bi-directional sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features 600W peak pulse Typical I less than 1A R capability at 10/1000s when V min>12V Uni-directional BR waveform, repetition rate Compatible with high (duty cycles):0.01% temperature reflow Glass passivated chip soldering (260C/30 s) junction in DO-15 Package V T = V 25C BR J BR Agency Approvals Fast response time: x (1+T x (T - 25)) J typically less than 1.0ps (T:Temperature from 0 Volts to BV min Coefficient, typical value Agency Agency File Number is 0.1%) Excellent clamping E230531 capability UL Recognized epoxy meeting flammability Typical failure mode is Maximum Ratings and Thermal Characteristics classification V-0 short from over-specified O (T =25 C unless otherwise noted) A voltage or current Matte tin leadfree plated Whisk er test conducted Halogen free and RoHS Parameter Symbol Value Unit based on Table 4a and 4c compliant Peak Pulse Power Dissipation(Fig.2) by 10/1000us of JEDEC JESD201A Pb-free E3 means 2nd Test Waveform(Fig.4)(Note 1) P 600 W PPM IEC 61000-4-2 ESD level interconnect is Pb- -Single Die Parts 30kV(Air), 30kV (Contact) free and the terminal finish Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4)(Note 1) P 800 W material is tin(Sn) (IPC/ EFT protection of data PPM -Stacked Die Parts(Note 4) JEDEC J-STD-609A.01) lines in accordance with Steady State Power Dissipation on Infinite Heat P 5.0 W IEC 61000-4-4 D Sink at T =75C L Low incremental surge Peak Forward Surge Current, 8.3ms Single Half I 100 A FSM Sine Wave Unidirectional Only (Note 2) resistance Maximum Instantaneous Forward Voltage at 50A V 3.5/5.0 V F for Unidirectional Only (Note 3) Operating Junction and Storage Temperature T , T -55 to 175 C J STG Range Applications Typical Thermal Resistance Junction to Lead R 20 C/W JL Typical Thermal Resistance Junction to Ambient R 75 C/W JA TVS components are ideal for the protection of I/O interfaces, V bus and other vulnerable circuits used in Notes: CC O 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) = 25 C per Fig. 3. J telecom, computer, industrial and consumer electronic 2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum. applications. 3. V < 3.5V for single die parts and V < 5.0V for stacked-die parts. F F 4. For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics. Functional Diagram Additional Infomarion Bi-directional Datasheet Samples Resources Cathode Anode Uni-directional 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20TVS Diodes Axial Leaded 600W > P6KE series Electrical Characteristics (T =25C unless otherwise noted) A Maximum Breakdown Test Maximum Maximum Agency Part Part Reverse Stand Reverse Voltage V Current BR Clamping Peak Approval Number Number off Voltage V Leakage R I (Volts) I Voltage Pulse Current T T (Uni) (Bi) (Volts) I V R R V I (V) I (A) (mA) C pp pp (A) Min. Max. P6KE6.8A P6KE6.8CA 5.80 6.45 7.14 10 10.5 58.1 1000 X P6KE7.5A P6KE7.5CA 6.40 7.13 7.88 10 11.3 54.0 500 X P6KE8.2A P6KE8.2CA 7.02 7.79 8.61 10 12.1 50.4 200 X P6KE9.1A P6KE9.1CA 7.78 8.65 9.55 1 13.4 45.5 50 X P6KE10A P6KE10CA 8.55 9.50 10.50 1 14.5 42.1 10 X P6KE11A P6KE11CA 9.40 10.50 11.60 1 15.6 39.1 5 X P6KE12A P6KE12CA 10.20 11.40 12.60 1 16.7 36.5 5 X P6KE13A P6KE13CA 11.10 12.40 13.70 1 18.2 33.5 1 X P6KE15A P6KE15CA 12.80 14.30 15.80 1 21.2 28.8 1 X P6KE16A P6KE16CA 13.60 15.20 16.80 1 22.5 27.1 1 X P6KE18A P6KE18CA 15.30 17.10 18.90 1 25.2 24.2 1 X P6KE20A P6KE20CA 17.10 19.00 21.00 1 27.7 22.0 1 X P6KE22A P6KE22CA 18.80 20.90 23.10 1 30.6 19.9 1 X P6KE24A P6KE24CA 20.50 22.80 25.20 1 33.2 18.4 1 X P6KE27A P6KE27CA 23.10 25.70 28.40 1 37.5 16.3 1 X P6KE30A P6KE30CA 25.60 28.50 31.50 1 41.4 14.7 1 X P6KE33A P6KE33CA 28.20 31.40 34.70 1 45.7 13.3 1 X P6KE36A P6KE36CA 30.80 34.20 37.80 1 49.9 12.2 1 X P6KE39A P6KE39CA 33.30 37.10 41.00 1 53.9 11.3 1 X P6KE43A P6KE43CA 36.80 40.90 45.20 1 59.3 10.3 1 X P6KE47A P6KE47CA 40.20 44.70 49.40 1 64.8 9.4 1 X P6KE51A P6KE51CA 43.60 48.50 53.60 1 70.1 8.7 1 X P6KE56A P6KE56CA 47.80 53.20 58.80 1 77.0 7.9 1 X P6KE62A P6KE62CA 53.00 58.90 65.10 1 85.0 7.2 1 X P6KE68A P6KE68CA 58.10 64.60 71.40 1 92.0 6.6 1 X P6KE75A P6KE75CA 64.10 71.30 78.80 1 103.0 5.9 1 X P6KE82A P6KE82CA 70.10 77.90 86.10 1 113.0 5.4 1 X P6KE91A P6KE91CA 77.80 86.50 95.50 1 125.0 4.9 1 X P6KE100A P6KE100CA 85.50 95.00 105.00 1 137.0 4.5 1 X P6KE110A P6KE110CA 94.00 105.00 116.00 1 152.0 4.0 1 X P6KE120A P6KE120CA 102.00 114.00 126.00 1 165.0 3.7 1 X P6KE130A P6KE130CA 111.00 124.00 137.00 1 179.0 3.4 1 X P6KE150A P6KE150CA 128.00 143.00 158.00 1 207.0 2.9 1 X P6KE160A P6KE160CA 136.00 152.00 168.00 1 219.0 2.8 1 X P6KE170A P6KE170CA 145.00 162.00 179.00 1 234.0 2.6 1 X P6KE180A P6KE180CA 154.00 171.00 189.00 1 246.0 2.5 1 X P6KE200A P6KE200CA 171.00 190.00 210.00 1 274.0 2.2 1 X P6KE220A P6KE220CA 185.00 209.00 231.00 1 328.0 1.9 1 X P6KE250A - 214.00 237.00 263.00 344.0 1.8 1 X P6KE250CA* 214.00 237.00 263.00 1 344.0 2.4 1 X P6KE300A - 256.00 285.00 315.00 1 414.0 1.5 1 X P6KE300CA* 256.00 285.00 315.00 1 414.0 2.0 1 X P6KE350A* P6KE350CA* 300.00 332.00 368.00 1 482.0 1.7 1 X P6KE400A* P6KE400CA* 342.00 380.00 420.00 1 548.0 1.5 1 X P6KE440A* P6KE440CA* 376.00 418.00 462.00 1 602.0 1.4 1 X P6KE480A* P6KE480CA* 408.00 456.00 504.00 1 658.0 1.3 1 X P6KE510A* P6KE510CA* 434.00 485.00 535.00 1 698.0 1.2 1 X P6KE530A* P6KE530CA* 451.00 503.50 556.50 1 725.0 1.2 1 X P6KE540A* P6KE540CA* 460.00 513.00 567.00 1 740.0 1.1 1 X P6KE550A* P6KE550CA* 468.00 522.50 577.50 1 760.0 1.1 1 X P6KE600A* P6KE600CA* 512.00 570.00 630.00 1 828.0 1.0 1 - For bidirectional type having V of 10 volts and less, the I limit is double. R R For parts without A , the V is 10% and V is 5% higher than with A parts, the parts without A are currently available, but not recommended for new designs. The parts with A are preferred. BR C For stack-die parts, use * to label the part number. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20