Reference Dimensions: PULSE-GUARD ESD Suppressors Note: For wave solder, increase the spacing 1.66 +/- 0.06 in both the horizontal and vertical dimensions by Surface Mount Polymeric Electrostatic Discharge Suppressors 0.254 (.010 ) where denoted by an asterisk (*) (0.066 +/- 0.003) 1.04 0.15 +/- 0.08 (0.041 ) REF (0.006 +/- 0.003) Reference Dimensions: RoHS PGB1 Series0.36 (0.014 ) 2.24 +/- 0.18 0.84 +/- 0.05 (0.088 +/- 0.007 ) (0.033 +/- 0.002) 3.00 +/- 0.20 0.43 +/- 0.18 Description 1.91 (0.118 +/- 0.008 ) (0.017 +/- 0.007) (0.075 ) 1.09 (0.043 ) 0.69 +/- 0.10 (0.027 +/- 0.004) PULSE-GUARD ESD Suppressors help protect sensitive 0.91 (0.036 ) Wave Solder electronic equipment against electrostatic discharge (ESD). They Reflow Solder 0.81 TYP (0.032 ) supplement the on-chip protection of integrated circuitry and are TYP 0.15 +/- 0.08 (0.006 +/- 0.003 ) best suited for low-voltage, high-speed applications where low TYP 0.51 (0.020 ) 0.76 (0.030 ) Reow Solder Wave Solder capacitance is important. Data ports utilizing such high-speed 3.05 3.30 1.02 (0.040 ) 1.02 (0.040 ) protocols as USB 2.0, IEEE1394, HDMI and DVI can benefit from (0.130 ) (0.120 ) 1.27 1.27 (0.050 ) (0.050 ) this new technology. 2.29 2.54 1.27 1.02 (0.040 ) 1.02 (0.040 ) (0.090 ) (0.100 ) 1.27 (0.050 ) (0.050 ) 1.27 (0.050 ) 0.64 PULSE-GUARD suppressors use polymer composite materials to 0.64 (0.025 ) (0.025 ) 0.51 suppress fast-rising ESD transients (as specified in IEC 61000-4-2), 2.29 (0.020 ) 2.03 (0.090 ) 0.76 (0.030 ) 0.76 (0.030 (0.080 )) while adding virtually no capacitance to the circuit. Features Equivalent Circuits R oHS compliant, lead-free W ithst ands multiple and available halogen-free ESD strikes 0402 and 0603 Devices SOT23 Device Equivalent Circuit Ultra-low capacitance Compatible with Equivalent Circuit 3 Low leakage current pick-and-place processes Fast response time A vailable in 1000, 3000, 5000 1 2 Bi-directional and 10000 piece reels (EIA- RS481) 1 2 Applications Product Characteristics HDTV Hardware External Storage Laptop/Desktop Computer Set-Top Box Lines Component Available as Network Hardware Antenna Part Number Protected Package Halogen-Free Computer Peripherals 1 PGB1010402 1 0402 No Digital Camera PGB1010603 1 0603 Yes PGB102ST23 2 SOT23 Yes Electrical Characteristics Specification PGB1010402 PGB1010603 PGB102ST23 Notes The ESD capability measured by direct and ESD Capability: air discharge method is subject to testing IEC 61000-4-2 Contact Discharge (typical) 8kV 8kV 8kV equipment and conditions. Numerous factors IEC 61000-4-2 Air Discharge (maximum) 15kV 15kV 15kV could affect the reliability and reproducibility of the direct and air discharge test results. Measured per IEC 61000-4-2 Peak Voltage (typical) 1000V 500V 500V 2 8kV Contact Discharge Measured per IEC 61000-4-2 Clamping Voltage (typical) 250V 150V 150V 2 8kV Contact Discharge , at 25 nsec. Rated Voltage (maximum) 12VDC 24VDC 24VDC Capacitance (typical) 0.04 pF 0.06 pF 0.12 pF Measured at 250 MHz Response Time <1nS <1nS <1nS Leakage Current (typical) <1nA (12 VDC) 24V 24V Some shifting in characteristics may occur 1000 1000 1000 ESD Pulse Withstand when tested over multiple pulses at a very rapid pulses min pulses min pulses min rate Notes: 1. PGB1 0402 product not offered as Halogen Free. See PGB2 series 0402 product instead ( PULSE-GUARD ESD Suppressors Surface Mount Polymeric Electrostatic Discharge Suppressors 1.00 1200 1000 800 PGB102ST23 0.10 600 PGB1040805 PGB1010603 Part Numbering System Dimensions PGB102ST23 PGB1010603 400 PGB1040805 PGB1010402 PGB1 01 0603 MR PGB1010402 0402 Device 200 Dimensions: mm (inch) 0.01 0 LEAD-FREE 0.71 (0.028) 0.1 +/- 0.09 0.86 (0.034) -250 25 50 75 100125 150 175 PULSE-GUARD 0 - 0.025 (0 - 0.0010) 100 1,000 10,000 (0.004 +/- 0.004 ) ESD SUPPRESSORS Frequency (MHz) Time (ns) 0.31 +/- 0.08 0.25 (0.012 +/- 0.003 ) (0.010 ) LINES PROTECTED: 01 = 1 line Body 0.24 +/- 0.09 02 = 2 lines (0.009 +/- 0.004 ) SIDE DEVICE SIZE CODE: 0402 = 0402 (1005)* 0.99 +/- 0.05 ** Note: 1,000 fF = 1 pF (0.039 +/- 0.002 ) 70 0603 = 0603 (1608) Termination ST23 = SOT23 Reow Solder 1.00 1200 0.51 +/- 0.05 QUANTITY & Recommended for (0.020 +/- 0.002 ) 60 reow soldering only PACKAGING CODE: 1000 MR = 1000 pieces, tape & reel 1.55 0.38 (0.061 ) WR = 3000 pieces, tape & reel (0.015 ) TOP 800 NR = 5000 pieces, tape & reel 50 .58 KR = 10,000 pieces, tape & reel (0.023 ) PGB102ST23 Note: 0.10 600 0.56 The device has two rectangular ink marking PGB1040805 *Note: PGB1 0402 product not available as Halogen Free item. PGB1010603 (0.022 ) to improve its identication by Automated See PGB2 0402 product instead, part number PGB2010402KRHF40 PGB102ST23 PGB1010603 Optical Inspection systems 400 (