TVS Diode Array (SPA Diodes) General Purpose ESD Protection - SD Series RoHS Pb GREEN SD Series 450W Discrete Unidirectional TVS Diode Description The Unidirectional SD series is designed for use in electronic equipment for low speed and DC applications. It will protect any sensitive equipment from damage due to electrostatic discharge (ESD) and other transient events. The SD series can safely absorb repetitive ESD strikes at 30kV (contact discharge, IEC 61000-4-2) without performance degradation and safely dissipate 30A (SD05) nd of 8/20s induced surge current (IEC61000-4-5 2 edition) with very low clamping voltages. Pinout and Functional Block Diagram Features ESD, IEC 61000-4-2, Low leakage current 30kV contact, 30kV air Small SOD323 package EFT, IEC 61000-4-4, 40A ts 0805 ffi ootprints (5/50ns) AEC-Q101 qualified 1 Lightning, 30A (8/20s as RoHS Compliant and defined in IEC 61000-4-5 Lead Free nd 2 edition) SD05 Moisture Sensitivity Level Low clamping voltage Applications 2 Switches / Buttons Notebooks / Desktops / Servers Test Equipment / Instrumentation Computer Peripherals Point-of-Sale Terminals Automotive Electronics Additional Information Medical Equipment Datasheet Resources Samples Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19 TVS Diode Array (SPA Diodes) General Purpose ESD Protection - SD Series Absolute Maximum Ratings Symbol Parameter Value Units 450 P Peak Pulse Power (t =8/20s) W pk p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR Note: CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. SD05 Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I =1A 5.0 V BR R Breakdown Voltage V I =1mA 6.0 V BR R Reverse Leakage Current I V =5V 1.0 A LEAK R I =1A, t =8/20s, Fwd 9.8 V PP p 1 Clamp Voltage V C I =10A, t =8/20s, Fwd 13.0 V PP P 2 Dynamic Resistance R TLP, t =100ns, I/O to Ground 0.22 DYN p Peak Pulse Current I t =8/20s 30.0 A pp p IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 350 pF I/O-GND SD12 Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage V I =1A 12.0 V RWM R Breakdown Voltage V I =1mA 13.3 V BR R Reverse Leakage Current I V =12V 1.0 A LEAK R I =1A, t =8/20s, Fwd 18.5 V PP p 1 Clamp Voltage V C I =10A, t =8/20s, Fwd 22.5 V PP P 2 Dynamic Resistance R TLP, t =100ns, I/O to Ground 0.29 DYN p Peak Pulse Current I t =8/20s 17.0 A pp p IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 150 pF I/O-GND 2018 Littelfuse, Inc. Specifications are subject to change without notice. Revision: 08/22/19