SLD30U-017 Littelfuse

TVS Diodes Axial Leaded 2200W > SLD series RoHS Pb e3 SLD Series Uni-directional Description The AEC-Q101 qualified SLD Series is packaged in a highly reliable industry standard P600 axial leaded package and is designed to provide precision overvoltage protection for sensitive electronics. Features Bi-directional High reliability application IEC-61 000-4-2 ESD and automotive grade 30kV(Air), 30kV (Contact) AEC-Q101 qualified with T ESD protection of dat a J 175C lines in accordance with V T = V 25C IEC 61000-4-2 Agency Approvals BR J BR x (1+T x (T - 25)) EFT protection of data J (T:Temperature lines in accordance with Agency Agency File Number Coefficient, typical value IEC 61000-4-4 E230531 is 0.1%) Low incremental surge Glass passivated chip resistance junction in P600 package High temperature Meets ISO7637 and Maximum Ratings and Thermal Characteristics to reflow soldering O ISO16750 load dump (T =25 C unless otherwise noted) guaranteed: 260C/10sec A test 2200W peak pulse / 0.375, (9.5mm) lead capability at 10s 150ms Parameter Symbol Value Unit length, 5 lbs., (2.3kg) waveform, repetition rate tension Peak Pulse Power Dissipation P 2200 W PPM (duty cycles): 0.01% 10ms x 150ms Test Waveform UL Recognized case Fast response time: Peak Pulse Power Dissipation material meeting P 5000 W PPM 10s x 1000s Test Waveform typically less than 1.0ps ammabilitfl y rating V-0. from 0 Volts to V min Steady STLte Power Dissipation on BR Matte tin leadfree plated P 8.0 W D Infinite Heat Sink at T =75C (Fig. 6) L Excellent clamping Halogen free and RoHS Peak Forward Surge Current, 8.3ms capability I 600 A FSM compliant Single Half Sine Wave (Note 3) T ypical failure mode is Pb-free E3 means 2nd Maximum Instlntlneous Forward Voltlge at short from over-specified V 3.5 V F 100A for Unidirectional Only level interconnect is Pb- voltage or current free and the terminal finish Operating Junction and Storage T , T -55 to 175 C Whisk er test is conducted J STG Temperature Range material is tin(Sn) (IPC/ based on JEDEC JEDEC J-STD-609A.01) Typical Thermal Resistlnce Junction to R 8.0 C/W JL JESD201A per its table 4a Lead and 4c Typical Thermal Resistlnce Junction to R 40 C/W JA Ambient Functional Diagram Applications Designed to protect sensitive electronics from: - Inductive Load Switching - Alternator Load Dump Bi-directional Cathode Anode Uni-directional 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19TVS Diodes Axial Leaded 2200W > SLD series Electrical Characteristics (T =25C unless otherwise noted) A Breakdown Test Reverse Maximum Maximum Maximum Agency Part Part Voltage V I BR T Current Stand off Reverse Peak Pulse Clamping Approval Number Number (V) I Voltage V Leakage V Current Voltage I T R R PP (Uni) (Bi) (Volts) I (A) I (A) V (V) (mA) MIN MAX R pp C SLD10U-017 SLD10-018 11.8 13.0 5.0 10 10 300.0 17.0 x SLD11U-017 SLD11-018 12.2 13.5 5.0 11 10 280.2 18.2 x SLD12U-017 SLD12-018 13.3 14.7 5.0 12 10 256.3 19.9 x SLD13U-017 SLD13-018 14.4 15.9 5.0 13 10 237.2 21.5 x SLD14U-017 SLD14-018 15.6 17.2 5.0 14 10 219.8 23.2 x SLD15U-017 SLD15-018 16.7 18.5 5.0 15 10 209.0 24.4 x SLD16U-017 SLD16-018 18.0 19.3 5.0 16 10 196.2 26.0 x SLD17U-017 SLD17-018 18.9 20.9 5.0 17 10 184.8 27.6 x SLD18U-017 SLD18-018 20.0 22.1 5.0 18 10 174.7 29.2 x SLD20U-017 SLD20-018 22.2 24.5 5.0 20 10 157.4 32.4 x SLD22U-017 SLD22-018 24.4 26.9 5.0 22 10 143.7 35.5 x SLD24U-017 SLD24-018 26.7 29.5 5.0 24 10 131.1 38.9 x SLD26U-017 SLD26-018 28.9 31.9 5.0 26 10 121.1 42.1 x SLD28U-017 SLD28-018 31.1 34.4 5.0 28 10 112.3 45.4 x SLD30U-017 SLD30-018 33.3 36.8 5.0 30 10 105.4 48.4 x SLD33U-017 SLD33-018 36.7 40.6 5.0 33 10 95.7 53.3 x SLD36U-017 SLD36-018 40.0 44.2 5.0 36 10 87.8 58.1 x SLD40U-017 SLD40-018 44.4 49.1 5.0 40 10 79.1 64.5 x SLD43U-017 SLD43-018 49.0 54.2 5.0 43 10 73.5 69.4 x SLD45U-017 SLD45-018 50.0 55.3 5.0 45 10 70.2 72.7 x SLD48U-017 SLD48-018 53.3 58.9 5.0 48 10 65.9 77.4 x SLD51U-017 SLD51-018 56.7 62.7 5.0 51 10 61.9 82.4 x SLD54U-017 SLD54-018 60.0 66.3 5.0 54 10 58.6 87.1 x SLD58U-017 SLD58-018 64.4 71.2 5.0 58 10 54.5 93.6 x SLD60U-017 SLD60-018 68.4 75.6 5.0 60 10 52.7 96.8 x Notes: 1. V measured after IT applied for 300s, IT= square wave pulse or equivalent. BR 2. Surge current waveform per 10s x 1000s exponential wave and derated per Fig. 4. 3. All terms and symbols are consistent with ANSI/IEEE C62.35 Load Dump Test Wave Form Parameter 12V system 24V system U 65v to 87V 123V to 174V S R 0.5 to 4 1 to 8 i t 40 ms to 400 ms 100 ms to 350 ms d t (10 )ms r -5 Note: LF use td=400ms for 12V system test td=350ms for 24V system 2019 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 07/11/19 0