SMDJ6.0 Littelfuse

TVS Diodes Surface Mount 3000W > SMDJ series Pb e3 RoHS SMDJ Series Description Uni-directional The SMDJ series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features 3000W P capability Low incremental PPM at 10/1000s waveform, surge resistance repetition rate (duty Typical I less than 2A when R Bi-directional cycles):0.01% V min>12V BR For surface mounted High temperature to reflow applications in order to soldering guaranteed: optimize board space Agency Approvals 260C/30sec Low profile package V T = V 25C x (1+T BR J BR Agency Agency File Number Typical failure mode is short x (T - 25))(T:Temperature J from over-specified voltage or Coefficient, typical E230531 current value is 0.1%) Whisker test is conducted UL Recognized compound Maximum Ratings and Thermal Characteristics based on JEDEC JESD201A meeting flammability rating O (T =25 C unless otherwise noted) A per its table 4a and 4c V-0 IEC-61000-4-2 ESD 30kV(Air), Meet MSL level1, per Parameter Symbol Value Unit 30kV (Contact) J-STD-020, LF maximun peak Peak Pulse Power Dissipation(Fig.2) of 260C ESD protection of data lines by 10/1000us Test Waveform(Fig.4) (Note P 3000 W PPM in accordance with Matte tin leadfree plated 1),(Note 2) -Single Die Parts IEC 61000-4-2 Halogen free and Peak Pulse Power Dissipation(Fig.2) EFT protection of data lines in by 10/1000us Test Waveform(Fig.4) (Note P 4000 W RoHS compliant PPM 1), (Note 2) -Stacked Die Parts (Note 5) accordance with Pb-free E3 means 2nd level IEC 61000-4-4 interconnect is Pb-free and Power Dissipation on Infinite Heat Sink P 6.5 W O D at T =50 C Built-in strain relief the terminal finish material is L tin(Sn) (IPC/JEDEC J-STD- Glass passivated chip junction Peak Forward Surge Current, 8.3ms I 300 A 609A.01) FSM Fast response time: typically Single Half Sine Wave (Note 3) less than 1.0ps from Maximum Instantaneous Forward 0V to BV min Voltage at 100A for Unidirectional V 3.5/5.0 V F Only(Note 4) Excellent clamping capability -65 to C Operating Temperature Range T J 150 -65 to Storage Temperature Range T C STG 175 Applications Typical Thermal Resistance Junction to R 15 C/W JL Lead TVS components are ideal for the protection of I/O Interfaces, V bus and other vulnerable circuits used in Typical Thermal Resistance Junction to CC R 75 C/W JA Ambient telecom, computer, Industrial and consumer electronic Notes: applications. O 1. Non-repetitive current pulse , per Fig. 4 and derated above T (initial) =25 C per Fig. 3. J 2. Mounted on copper pad area of 0.31x0.31 (8.0 x 8.0mm) to each terminal. 3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional component only, duty cycle=4 per minute maximum. 4. V < 3.5V for single die parts and V < 5.0V for stacked-die parts. F F 5. For stacked die component details, please refer to part numbers labeled by * in Electrical Characteristics. Additional Infomarion Functional Diagram Bi-directional Datasheet Resources Samples Cathode Anode Uni-directional 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/29/20TVS Diodes Surface Mount 3000W > SMDJ series Electrical Characteristics (T =25C unless otherwise noted) A Maximum Maximum Maximum Maximum Breakdown Maximum Marking Test Clamping Peak Clamping Peak Maximum Agency Voltage V Part Part Reverse Reverse Current Voltage VC Pulse Voltage VC Pulse Temperature Approval Number Number Stand off Leakage IR I Current Current coefficient T (Uni) (Bi) Voltage V VR (mA) Ipp(10/1000s) Ipp(10/1000s) Ipp(8/20s) Ipp(8/20s) of VBR (%/C) UNI BI MIN MAX (A) (V) (A) (V) (A) SMDJ5.0A SMDJ5.0CA RDE DDE 5.0 6.40 7.00 10 9.2 326.1 11.89 1630.5 800 0.041 X SMDJ6.0A SMDJ6.0CA RDG DDG 6.0 6.67 7.37 10 10.3 291.3 13.31 1456.5 800 0.046 X SMDJ6.5A SMDJ6.5CA RDK DDK 6.5 7.22 7.98 10 11.2 267.9 14.47 1339.5 500 0.052 X SMDJ7.0A SMDJ7.0CA PDM DDM 7.0 7.78 8.60 10 12.0 250.0 15.50 1250.0 200 0.058 X SMDJ7.5A SMDJ7.5CA PDP DDP 7.5 8.33 9.21 1 12.9 232.6 16.67 1163.0 100 0.061 X SMDJ8.0A SMDJ8.0CA PDR DDR 8.0 8.89 9.83 1 13.6 220.6 17.57 1103.0 50 0.064 X SMDJ8.5A SMDJ8.5CA PDT DDT 8.5 9.44 10.40 1 14.4 208.3 18.60 1041.5 20 0.066 X SMDJ9.0A SMDJ9.0CA PDV DDV 9.0 10.00 11.10 1 15.4 194.8 19.90 974.0 10 0.069 X SMDJ10A SMDJ10CA PDX DDX 10.0 11.10 12.30 1 17.0 176.5 21.96 882.5 5 0.071 X SMDJ11A SMDJ11CA PDZ DDZ 11.0 12.20 13.50 1 18.2 164.8 23.51 824.0 2 0.074 X SMDJ12A SMDJ12CA PEE DEE 12.0 13.30 14.70 1 19.9 150.8 25.71 754.0 2 0.075 X SMDJ13A SMDJ13CA PEG DEG 13.0 14.40 15.90 1 21.5 139.5 27.78 697.5 2 0.076 X SMDJ14A SMDJ14CA PEK DEK 14.0 15.60 17.20 1 23.2 129.3 29.97 646.5 2 0.08 X SMDJ15A SMDJ15CA PEM DEM 15.0 16.70 18.50 1 24.4 123.0 31.52 615.0 2 0.083 X SMDJ16A SMDJ16CA PEP DEP 16.0 17.80 19.70 1 26.0 115.4 33.59 577.0 2 0.084 X SMDJ17A SMDJ17CA PER DER 17.0 18.90 20.90 1 27.6 108.7 35.66 543.5 2 0.085 X SMDJ18A SMDJ18CA PET DET 18.0 20.00 22.10 1 29.2 102.7 37.73 513.5 2 0.088 X SMDJ20A SMDJ20CA PEV DEV 20.0 22.20 24.50 1 32.4 92.6 41.86 463.0 2 0.091 X SMDJ22A SMDJ22CA PEX DEX 22.0 24.40 26.90 1 35.5 84.5 45.87 422.5 2 0.092 X SMDJ24A SMDJ24CA PEZ DEZ 24.0 26.70 29.50 1 38.9 77.1 50.26 385.5 2 0.092 X SMDJ26A SMDJ26CA PFE DFE 26.0 28.90 31.90 1 42.1 71.3 54.39 356.5 2 0.093 X SMDJ28A SMDJ28CA PFG DFG 28.0 31.10 34.40 1 45.4 66.1 58.66 330.5 2 0.094 X SMDJ30A SMDJ30CA PFK DFK 30.0 33.30 36.80 1 48.4 62.0 62.53 310.0 2 0.096 X SMDJ33A SMDJ33CA PFM DFM 33.0 36.70 40.60 1 53.3 56.3 68.86 281.5 2 0.097 X SMDJ36A SMDJ36CA PFP DFP 36.0 40.00 44.20 1 58.1 51.6 75.06 258.0 2 0.098 X SMDJ40A SMDJ40CA PFR DFR 40.0 44.40 49.10 1 64.5 46.5 83.33 232.5 2 0.099 X SMDJ43A SMDJ43CA PFT DFT 43.0 47.80 52.80 1 69.4 43.2 89.66 216.0 2 0.1 X SMDJ45A SMDJ45CA PFV DFV 45.0 50.00 55.30 1 72.7 41.3 93.93 206.5 2 0.101 X SMDJ48A SMDJ48CA PFX DFX 48.0 53.30 58.90 1 77.4 38.8 100.00 194.0 2 0.101 X SMDJ51A SMDJ51CA PFZ DFZ 51.0 56.70 62.70 1 82.4 36.4 106.46 182.0 2 0.101 X SMDJ54A SMDJ54CA RGE DGE 54.0 60.00 66.30 1 87.1 34.4 112.53 172.0 2 0.102 X SMDJ58A SMDJ58CA PGG DGG 58.0 64.40 71.20 1 93.6 32.1 120.93 160.5 2 0.103 X SMDJ60A SMDJ60CA PGK DGK 60.0 66.70 73.70 1 96.8 31.0 125.06 155.0 2 0.103 X SMDJ64A SMDJ64CA PGM DGM 64.0 71.10 78.60 1 103.0 29.1 133.07 145.5 2 0.104 X SMDJ70A SMDJ70CA PGP DGP 70.0 77.80 86.00 1 113.0 26.5 145.99 132.5 2 0.105 X SMDJ75A SMDJ75CA PGR DGR 75.0 83.30 92.10 1 121.0 24.8 156.33 124.0 2 0.106 X SMDJ78A SMDJ78CA PGT DGT 78.0 86.70 95.80 1 126.0 23.8 162.79 119.0 2 0.106 X SMDJ85A SMDJ85CA PGV DGV 85.0 94.40 104.00 1 137.0 21.9 177.00 109.5 2 0.106 X SMDJ90A SMDJ90CA PGX DGX 90.0 100.00 111.00 1 146.0 20.5 188.63 102.5 2 0.107 X SMDJ100A SMDJ100CA PGZ DGZ 100.0 111.00 123.00 1 162.0 18.5 209.30 92.5 2 0.107 X SMDJ110A SMDJ110CA PHE DHE 110.0 122.00 135.00 1 177.0 16.9 228.68 84.5 2 0.107 X SMDJ120A SMDJ120CA PHG DHG 120.0 133.00 147.00 1 193.0 15.5 249.35 77.5 2 0.108 X SMDJ130A SMDJ130CA PHK DHK 130.0 144.00 159.00 1 209.0 14.4 270.03 72.0 2 0.108 X SMDJ150A - PHM - 150.0 167.00 185.00 1 243.0 12.3 313.95 61.5 2 0.108 X - SMDJ150CA* - DHM 150.0 167.00 185.00 1 243.0 16.5 313.95 61.5 2 0.108 X SMDJ160A - PHP - 160.0 178.00 197.00 1 259.0 11.6 334.63 58.0 2 0.108 X - SMDJ160CA* - DHP 160.0 178.00 197.00 1 259.0 15.5 334.63 58.0 2 0.108 X SMDJ170A - PHR - 170.0 189.00 209.00 1 275.0 10.9 355.30 54.5 2 0.108 X - SMDJ170CA* - DHR 170.0 189.00 209.00 1 275.0 14.6 355.30 54.5 2 0.108 X SMDJ180A* SMDJ180CA* PHT DHT 180.0 200.00 221.00 1 292.0 13.7 377.26 51.5 2 0.108 X SMDJ200A* SMDJ200CA* PHV DHV 200.0 224.00 247.00 1 324.0 12.4 418.60 46.5 2 0.11 X SMDJ220A* SMDJ220CA* PKE DKE 220.0 244.00 270.00 1 356.0 11.3 459.95 42.0 2 0.11 X SMDJ250A* SMDJ250CA* PKG DKG 250.0 279.00 309.00 1 405.0 9.9 523.26 37.5 2 0.11 X SMDJ300A* SMDJ300CA* PKI DKI 300.0 335.00 371.00 1 486.0 8.3 627.91 31.0 2 0.112 X SMDJ350A* SMDJ350CA* PKJ DKJ 350.0 391.00 432.00 1 567.0 7.1 732.56 26.5 2 0.112 X SMDJ400A* SMDJ400CA* PKL DKL 400.0 447.00 494.00 1 648.0 6.2 837.21 23.5 2 0.112 X SMDJ440A* SMDJ440CA* PKN DKN 440.0 492.00 543.00 1 713.0 5.7 921.19 21.5 2 0.112 X For bidirectional type having V of 10 volts and less, the I limit is double. R R For stack-die parts, use * to label the part number. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/29/20