TVS Diode Arrays (SPA Diodes) Lightning Surge Protection - SP03-6 Series RoHS Pb GREEN SP03-6 Series 6V 150A Diode Array Description This new broadband protection component from Littelfuse provides overvoltage protection for applications such as 10/100/1000 BaseT Ethernet, T3/E3 DS3 interfaces, ADSL2+, and VDSL2+. This new protector combines the TVS diode element with a diode rectifier bridge to provide both longitudinal and differential protection in one package. This innovative design results in a capacitive loading characteristic that is log-linear with respect to the signal voltage across the device. This reduces intermodulation (IM) distortion caused by a typical solid-state protection solution. Agency Approvals Features RoHS-compliant and lead- UL Recognized Agency Agency File Number free compound meeting E128662 ammabilitfl y rating V-0 SOIC-8 surface mount package (JEDEC MS-012) Lightning, 150A (8/20 as defined in IEC 61000-4-5 Low insertion loss, log- 2nd Edition) Pinout linear capacitance Low clamping voltage Combined longitudinal 1 8 and differential protection Clamping speed of 2 7 nanoseconds 3 6 Applications 4 5 T1/E1 Line cards 10/100/1000 BaseT Ethernet T3/E3 and DS3 Interfaces SOIC-8 (Top View) STS-1 Interfaces Functional Block Diagram Application Example Pin 1 and 8 Line out Line in TeleLink (0461 1.25) SP03-6 TIP 1 8 Pin 2, 3, 6, 2 7 to chipset and 7 (Ethernet PHY, T3/E3 PHY, etc.) 3 6 4 5 Line in Line out RING Pin 4 and 5 This schematic shows a high-speed data interface Additional Information protection solution. The SP03-6 provides both metallic (differential) and longitudinal (common mode) protection from lightning induced surge events. Its surge rating is compatible with the intra-building surge requirements of Telcordias GR-1089-CORE, and the Basic Level Datasheet Resources Samples Recommendations of ITU K.20 and K.21. This component protects against both positive and negative induced surge events. The TeleLink fuse provides overcurrent protection Life Support Note: for the long term 50/60 Hz power fault events. Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.12/28/20 TVS Diode Arrays (SPA Diodes) Lightning Surge Protection - SP03-6 Series Absolute Maximum Ratings Parameter Rating Units Peak Pulse Current (8/20s) 150 A Peak Pulse Power (8/20s) 2800 W IEC 61000-4-2, Contact Discharge, (Level 4) 30 kV IEC 61000-4-2, Air Discharge, (Level 4) 30 kV IEC 61000-4-5, 2nd Edition (8/20) 100 A Telcordia GR 1089 (Intra-Building) (2/10s) 150 A ITU K.20 (5/310s) 40 A CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T = 25C) OP Parameter Symbol Test Conditions Min Typ Max Units Reverse Stand-Off Voltage V - - - 6 V RWM Reverse Breakdown Voltage V I = 1mA 6.8 - - V BR T Reverse Leakage Current I V = 6V, T= 25C - - 25 A R RWM Clamping Voltage, Line-Ground V I = 50A, t =8/20 s - - 15 V C PP p Clamping Voltage, Line-Ground V I = 100A, t =8/20 s - - 20 V C PP p Between I/O Pins and Ground C (Line-Ground) - 16 25 pF j V =0V, f= 1MHz R Junction Capacitance Between I/O Pins C (Line-Line) - 8 12 pF j V =0V, f= 1MHz R Figure 1: Non-repetitive Peak Pulse Current vs. Pulse Time Figure 2: Current Derating Curve 1000 120 100 100 80 60 10 40 20 11 0 110100 1000 020406080100 120140 160 Ambient Temperature (C) Pulse decay time (s) 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD.12/28/20 Peak Pulse Current (A) Percentage of Rated Current (%I ) P