TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) Low Capacitance ESD Protection - SP0502B Series RoHS Pb GREEN SP0502B Series 1pF 15kV Diode Arrays Description The SP0502B is a low capacitance TVS diode array designed to protect high-speed data interfaces from over-voltage caused by ESD (electrostatic discharge), CDE (Cable Discharge Events), and EFT (electrical fast transients). It has a typical capacitance of only 0.3pF (pin 1 to 2) making it suitable for use on circuits operating in excess of 3GHz without signal attenuation. The SP0502BXTG is in a small SOT-523 package and each device can be configured to protect 1 bidirectional line or two unidirectional lines. The combination of small size, ultra-low capacitance, and high level of ESD protection makes it an ideal solution for applications such as HDMI, USB, MDDI, antennas, and DisplayPort. Functional Block Diagram and Pinout Features R oHS compliant and lead- Stand-off voltage of 5V 2 1 free Low capacitance of 1pF ESD protection of 1 5kV V =0V (MAX) R contact discharge, Low leakage current of 20kV air discharge, (IEC 0.5A at 5V (MAX) 61000-4-2) Small form factor EFT, IEC 61000-4-4, 40A (SOT523) and low profile 3 (5/50ns) (<1mm) Lightning protection, IEC No insertion loss to Life Support Note: 61000-4-5 2nd edition, 2A Not Intended for Use in Life Support or Life Saving Applications >3.0GHz (t =8/20s) The products shown herein are not designed for use in life sustaining or life saving p applications unless otherwise expressly indicated. Additional Information Applications High-Definition USB 2.0 Multimedia Interface DisplayPort (HDMI) Datasheet Resources Samples Mobile - Smartphone, Mobile Displa y Digital Tablet, Notebook Interface (MDDI) RF/Antenna Circuits 2019 Littelfuse, Inc. Specifications are subject to change without notice. 1 Revision: 08/22/19 TTVS VS Diode ArDiode Arrraaysys (SP(SPAA Diodes)Diodes) Low Capacitance ESD Protection - SP0502B Series Absolute Maximum Ratings Symbol Parameter Value Units P Peak Pulse Power (t =8/20s) 25 W PK P I Peak Pulse Current (t =8/20s) 2 A PP P T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Thermal Information Parameter Rating Units Storage Temperature Range -55 to 150 C Maximum Junction Temperature 150 C Maximum Lead Temperature (Soldering 20-40s) 260 C Electrical Characteristics (T = 25C) OP Parameter Symbol Test Conditions Min Typ Max Units I 1A, Pin1 or Pin2 to Pin3 and Pin1 to R Reverse Standoff Voltage V 5.0 V RWM Pin2 Reverse Breakdown Voltage V I =1mA, Pin1 or Pin2 to Pin3 6 V BR t Leakage Current I V =5V 0.5 A LEAK R 1 Clamp Voltage V I =1A, t =8/20s, Pin 1 to Pin 2 12 V C PP p 2 Dynamic Resistance 0.45 R TLP, tp=100ns, I/O to GND DYN IEC 61000-4-2 (Contact Discharge) 15 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 20 kV Reverse Bias=0V, f=1MHz C 0.25 0.5 pF I/O-I/O Pin 1 to Pin2 1 Diode Capacitance Reverse Bias=0V, f=1MHz C 1.0 pF I/O-GND Pin 1 or Pin2 to Pin 3 Note: 1Parameter is guaranteed by design and/or device characterization. 2 Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. 2019 Littelfuse, Inc. Specifications are subject to change without notice. 2 Revision: 08/22/19